2018年11月26日星期一

FVDI 2018 Abrites Full Package FVDI Abrites Commander With 18 Softwares Better Than FVDI 2015 2016

FVDI 2018 Abrites is the new generation of FVDI Abrites Commander. FVDI 2018 Abrites Full Package  is hot sell baby in the pass years. OBD2Store.com FVDI 2018 Abrites Full Package FVDI Abrites Commander With 18 Softwares Better Than FVDI 2015 2016.

Original FVDI 2018 Abrites Commander Fly FVDI 2018 Full Package With 18 Softwares Unlimited Tokens Covers VVDI2 FVDI 2016 FVDI 2015 FVDI 2014 Function
fvdi 2018

1.) FVDI V2015 or higher with softdog versions:

If the pc cannot detecting any fvdi’s then the LPC1788 processor was erased ( the Quickloader v6.3 and v7.0 will erasing the LPC processor ).

always erasing are the following two address: 0x00000000-0x00047FFF or 0x00000000-0x0007FFFF , pls check the attacment.

After the FVDI died bec there are no has a BOOT sector and the some firmware rows. Still i working on this solution.

2.) if you cannot bought any FVDI abrites commander. from FLY Company, then the pc will go to internet then always erasing all FVDI LPC processors by FLY server !!!!!

3.) I solved all algorithms to fvdi abrites commander.firmware encrypting/decrypting and now i looking the 8bytes key to v2015 version. pls be patience anybody’s…..

FVDI 2018 Abrites Commander from obd2store.com is better:

Here we advice you have obd2store.com FVDI 2018 ABRITES Commander Full Version (18 Software).

1) Covers all the functions of FVDI 2014 2015.

2) can connect to internet.

3) no need activation, use it directly after installation.

4) Support online update on www.flyobd.com.

5) can renew ism and tcu for benz.

6) Can do mileage correction for opel insignia 2015-2017, opel astra K, and new corsa.

OBD2Store.com - China OBD2 Tool, Automotive Diagnostic Tools, Car Key Programmer, OBD2 ECU chip tuning tool Center.

Contact information:
Website: www.obd2store.com
Email: chinaobd2store@gmail.com
Skype: sales-obd2store@outlook.com
Whatapp: +86-13682550935

ODIS 5.0.3 Install Software HDD 5 in 1 ODIS 5.0.3 Download Software Features with ODIS 5.0.3 Postsetup + Launcher + License No Need Activation

ODIS 5.0.3 Install Software HDD can work with vas 5054a and vas 6154. 5 in 1 ODIS 5.0.3 Download Software update from odis 4.4.10. OBD2Store.com ODIS 5.0.3 Install Software HDD 5 in 1 ODIS 5.0.3 Download Software Features with ODIS 5.0.3 Postsetup + Launcher + License No Need Activation.

5 in 1 ODIS 5.0.3 Download Software ODIS 5.0.3 Installed Software Hard Disk With VAG ODIS Engineering 9.0.4 Licence Download, ETKA 8.1, Elsawin 5.3 Ready To Use



5 in 1 ODIS 5.0.3 Download Software from obd2store.com features:

Software version: Odis 5.0.3

Engineer version: 9.0.4, Elsawin 5.3, etka 8.1,

Languages: English, if you need other language, please contact us via Skype: sales-obd2store@outlook.com, Whatapp: +86-13682550935 to get the customization.

CPU:

32 bit or 64-bit ,need Intel Core i3 or better

2.2GHz or faster core speed

RAM:
4GB RAM minimum

Supported most Volkswagen Group Car Models: VW, AUDI, SKODA (1996-Present), include Lamborghini and Bentley database

Features: ODIS 5.0.3 install Software from obd2store.com no need activation, can directly use.

OBD2Store.com - China OBD2 Tool, Automotive Diagnostic Tools, Car Key Programmer, OBD2 ECU chip tuning tool Center.

Contact information:

Website: www.obd2store.com
Email: chinaobd2store@gmail.com
Skype: sales-obd2store@outlook.com
Whatapp: +86-13682550935

2018年10月26日星期五

Renolink OBD2 Renault ECU Programmer Renault Renolink ECU Programming Device can easily virginize and re-program the parts like UCH

Renolink OBD2 Renault ECU Programmer can do ECU Programming, Airbag Programming And Key Coding. Renault Renolink ECU Programming Device With V1.52 Renolink Renault Software. OBD2Store.com Renolink OBD2 Renault ECU Programmer Renault Renolink ECU Programming Device can easily virginize and re-program the parts like UCH.

Renolink OBD2 Renault ECU Programmer Renault Renolink ECU Programming Device With V1.52 Renolink Renault Software


Renolink Renault ECU Programmer from obd2store.com is a professional programming device for programming electronic control units in Renault and Dacia vehicles, including new models recently produced.

Renolink has many features like UCH matching, airbag programming, engine ECU programming, key coding, key deletion, dashboard coding, eprom and flash reading and writing in Renault and Dacia vehicles.

The works you can do with obd2store.com Renault Renolink programming device:

- Eprom read / write
- ECU Resetting
- Clear Crash Airbag
- Airbag reset
- Airbag Virginize
Keys
- KEY Programming
TDB (cluster)
- Indicator Programming
- ECM Programming
- UCH Programming
-
EPS Virginizer
- EPS Resetting

OBD2Store.com - China OBD2 Tool, Automotive Diagnostic Tools, Car Key Programmer, OBD2 ECU chip tuning tool Center.

Contact information:

Website: www.obd2store.com
Email: chinaobd2store@gmail.com
Skype: sales-obd2store@outlook.com
Whatapp: +86-13682550935

2018年10月24日星期三

Using Audi VW Geko Certificate Installation Services For ODIS Online Certificate 2054 For vag geko online programing

Audi VW Geko Certificate Installation Services With ODIS License Patch File. ODIS Online Certificate 2054 work with audi vw odis online account. OBD2Store.com Using Audi VW Geko Certificate Installation Services For ODIS Online Certificate 2054 For vag geko online programing.

Audi VW Geko Certificate Installation Services For ODIS Certificate 2054 With ODIS License Patch File



Note: OBD2Store.com This Audi VW Geko Certificate Installation Services just for one laptop.

Audi VW Geko Certificate Installation Services is necessary for Audi VW ODIS online coding. older odis Geko Certificate 2021 is stop working now, cutsomers met odis license invalid and odis license expired problem, if any one need to do vag geko online programing, need pay for the odis certicate for geko online installation.

What’s the ODIS Geko certificate & ODIS online account?

The ODIS certificate is for ODIS contacted to server, only license for input odis online coding account

The ODIS account is login and password, which is account working for online coding, need have certificate for enter it working.

How to offer Geko Online Certificate:

Geko certificate need pay for each installation. Need it just contact obd2store.com freely.

OBD2Store.com - China OBD2 Tool, Automotive Diagnostic Tools, Car Key Programmer, OBD2 ECU chip tuning tool Center.

Contact information:

Website: www.obd2store.com
Email: chinaobd2store@gmail.com
Skype: sales-obd2store@outlook.com
Whatapp: +86-13682550935

2018年10月23日星期二

Scania SDP3 V2.37 Download Software Scania SDP3 2.37 Crack Software Without USB Dongle With One Time Free Acttivation

Scania SDP3 V2.37 Download Software Update From V2.36 Scania SDP3 Software. Scania SDP3 2.37 Crack Software can work with scania vci-3 vci 3 scanner. OBD2Store.com Scania SDP3 V2.37 Download Software Scania SDP3 2.37 Crack Software Without USB Dongle With One Time Free Acttivation. 

V2.37 Scania SDP3 Download Software Scania SDP3 2.37 Crack Software Without USB Dongle
Scania SDP3 V2.37 Download Software

Scania SDP3 V2.37 Download Software from obd2store.com: 
https://mega.nz/#!GNwkmSxY!o637Wl-tOgw2ESfoQkERrdUVsPBMJrqBhj9T-1gytSA
Password: scania2.37.2@

Please give us teamviewer ID and password after you pay, obd2store.com engineer will install and activate free online for you. (Including one time free activation only)

V2.37 Scania SDP3 Download Software from obd2store.com Support Operating System:


Win7 sp1 ultimate edition 32 or 64
Win7 pro sp1  just 32 bit
Win10 pro  

OBD2Store.com Scania SDP3 2.37 Crack Software Features:


Check and adjustements
Conversion
Maintenance
Campaign
Bodywork
Fault Codes
Fault Reporting
Programming of Control units

Need Netframework 4.5 installed on system. 
In order to install SDP3, administrator rights are required.

UPDATE ECA Please also see Scania Ti 04-14 02 16 for more information about background and regarding the update process.

OBD2Store.com - China OBD2 Tool, Automotive Diagnostic Tools, Car Key Programmer, OBD2 ECU chip tuning tool Center.

Contact information:

Website: www.obd2store.com 
Email: chinaobd2store@gmail.com
Skype: sales-obd2store@outlook.com
Whatapp: +86-13682550935

2016 Release 1 Delphi DS150e Tester With Autocom/Dephi 2016.1 Download Software no delphi 2016.1 keygen

2016 Release 1 Delphi DS150e Tester can work delphi 2016.1 crack Software. Autocom/Dephi 2016.1 Download Software Need Use delphi 2016.1 license.key to do delphi 2016.1 activation. OBD2Store.com 2016 Release 1 Delphi DS150e Tester With Autocom/Dephi 2016.1 Download Software no delphi 2016.1 keygen.

Bluetooth Delphi DS150e New VCI New Design Delphi DS150e Diagnostic Tool With Autocom/Dephi 2016.1 Download Software


Software Version: Autocom/delphi 2016 release 1

How To Do 2016 Release 1 Delphi DS150e Diagnostic Tool Autocom/Dephi 2016.1 Download Software Activation :

New Design Delphi DS150e Diagnostic Tool from obd2store.com without delphi 2016.1 keygen activator, Need Use delphi 2016.1 license.key to do delphi 2016.1 activation(Client can send delphi 2016.1 activation file to email: chinaobd2store@gmail.com for active free.

Support Languages: English, Cesky, Dansk, Deutsch, Espanol, Francais, Greek, Hollands, Hungarian, Italiano, Norsk, Polish, Romania,Russian, Srpski, Suomen kieli, Svenska, Turkish and so on.

Autocom/Dephi 2016.1 Download Software from obd2store.com:

https://pan.baidu.com/s/1jiFZIcCnkP_PSp1gElqA9Q

OBD2Store.com - China OBD2 Tool, Automotive Diagnostic Tools, Car Key Programmer, OBD2 ECU chip tuning tool Center.

Contact information:

Website: www.obd2store.com
Email: chinaobd2store@gmail.com
Skype: sales-obd2store@outlook.com
Whatapp: +86-13682550935

2018年10月21日星期日

Original Plan VAG COM 18.9.0 Diagnostic Interface Genuine Ross Tech VCDS 18.9.0 Crack Cable With VCDS 18.9.0 Download Software Update New Features

Original Plan VAG COM 18.9.0 Diagnostic Interface need work with VCDS Loader V1.12 Download. Genuine Ross Tech VCDS 18.9.0 Crack Cable Software and Firmware can update Online. OBD2Store.com Original Plan VAG COM 18.9.0 Diagnostic Interface Genuine Ross Tech VCDS 18.9.0 Crack Cable With VCDS 18.9.0 Download Software Update New Features.

Genuine Ross Tech VCDS 18.9.0 Crack Cable VAG COM 18.9.0 Diagnostic Interface With VCDS 18.9.0 Download Software 



OBD2Store.com VCDS Loader V1.12 Download: https://mega.nz/#!ZaRwnC6J!0V7vDSs5hBIi-pmr1-uUz2D-4FxxLfJuimzyLu18V6o

VCDS 18.9.0 Software Download from obd2store.com: 

https://mega.nz/#!QcNlQSoY!7fC4-smAkyPLRmr6R46yWXViu3vxzsXrd8hFVtgl6ss

OBD2Store.com Original Plan VAG COM 18.9.0 Diagnostic Interface Genuine Ross Tech VCDS 18.9.0 Crack Cable With VCDS 18.9.0 Download Software Update New Features: 

Release VCDS 18.9 works with Windows 7, 8, and 10 (both 32-bit and 64-bit)
Earlier versions of Windows such as 2000, XP, and Vista might still work, but we no longer consider them supported.
VCDS does not work on “Windows 10 S”, which does not allow software to be installed from any source other than the Microsoft Store. If wish to use VCDS on a computer with this “Student” version of Windows, you’ll need to upgrade it to Windows 10 Pro.
Windows running in a VM (Parallels, Virtual Box, etc) may work but is not supported.
Windows 95, 98, ME, and NT4 definitely will not work.

Release 18.9 must be used with a licensed Ross-Tech interface.  That include all genuine HEX-, KEY-, KII-, or Micro-CAN series Interface of interfaces.

It does not work with any third-party interfaces or some of the older “low-tech” interfaces we made and sold before 2004.

If you’re a registered user and have an older low-tech interface, you should consider ross tech interface.

If you’re not ready for an interface upgrade, you’ll have to use VCDS-Lite instead.

The default installation folder is C:\Ross-Tech\VCDS\

It is essential NOT to install in the \Program Files\ tree in on systems running Windows Vista or newer.

To remove other old versions:

Versions prior to Release 704, simply delete the shortcuts from your Start menu and

Desktop and delete the folder(s) where the program was installed..

Release 704 and newer may be uninstalled using Windows’ Add/Remove Programs or by running the

The uninstall.exe program found in the folder with the version that you wish to remove.

Need VCDS 18.9.0 VAG-COM VCDS 18.9 Ross-Tech Register Interface Ross-Tech VCDS genuine interface just contact us freely.

OBD2Store.com - China OBD2 Tool, Automotive Diagnostic Tools, Car Key Programmer, OBD2 ECU chip tuning tool Center.

Contact information:

Website: www.obd2store.com
Email: chinaobd2store@gmail.com
Skype: sales-obd2store@outlook.com
Whatapp: +86-13682550935

Original Plan VAG COM 18.9.0 Diagnostic Interface Genuine Ross Tech VCDS 18.9.0 Crack Cable With VCDS 18.9.0 Download Software Update New Features

Original Plan VAG COM 18.9.0 Diagnostic Interface need work with VCDS Loader V1.12 Download. Genuine Ross Tech VCDS 18.9.0 Crack Cable Software and Firmware can update Online. OBD2Store.com Original Plan VAG COM 18.9.0 Diagnostic Interface Genuine Ross Tech VCDS 18.9.0 Crack Cable With VCDS 18.9.0 Download Software Update New Features.

Genuine Ross Tech VCDS 18.9.0 Crack Cable VAG COM 18.9.0 Diagnostic Interface With VCDS 18.9.0 Download Software 



OBD2Store.com VCDS Loader V1.12 Download: https://mega.nz/#!ZaRwnC6J!0V7vDSs5hBIi-pmr1-uUz2D-4FxxLfJuimzyLu18V6o

VCDS 18.9.0 Software Download from obd2store.com: 

https://mega.nz/#!QcNlQSoY!7fC4-smAkyPLRmr6R46yWXViu3vxzsXrd8hFVtgl6ss

OBD2Store.com Original Plan VAG COM 18.9.0 Diagnostic Interface Genuine Ross Tech VCDS 18.9.0 Crack Cable With VCDS 18.9.0 Download Software Update New Features: 

Release VCDS 18.9 works with Windows 7, 8, and 10 (both 32-bit and 64-bit)
Earlier versions of Windows such as 2000, XP, and Vista might still work, but we no longer consider them supported.
VCDS does not work on “Windows 10 S”, which does not allow software to be installed from any source other than the Microsoft Store. If wish to use VCDS on a computer with this “Student” version of Windows, you’ll need to upgrade it to Windows 10 Pro.
Windows running in a VM (Parallels, Virtual Box, etc) may work but is not supported.
Windows 95, 98, ME, and NT4 definitely will not work.

Release 18.9 must be used with a licensed Ross-Tech interface.  That include all genuine HEX-, KEY-, KII-, or Micro-CAN series Interface of interfaces.

It does not work with any third-party interfaces or some of the older “low-tech” interfaces we made and sold before 2004.

If you’re a registered user and have an older low-tech interface, you should consider ross tech interface.

If you’re not ready for an interface upgrade, you’ll have to use VCDS-Lite instead.

The default installation folder is C:\Ross-Tech\VCDS\

It is essential NOT to install in the \Program Files\ tree in on systems running Windows Vista or newer.

To remove other old versions:

Versions prior to Release 704, simply delete the shortcuts from your Start menu and

Desktop and delete the folder(s) where the program was installed..

Release 704 and newer may be uninstalled using Windows’ Add/Remove Programs or by running the

The uninstall.exe program found in the folder with the version that you wish to remove.

Need VCDS 18.9.0 VAG-COM VCDS 18.9 Ross-Tech Register Interface Ross-Tech VCDS genuine interface just contact us freely.

OBD2Store.com - China OBD2 Tool, Automotive Diagnostic Tools, Car Key Programmer, OBD2 ECU chip tuning tool Center.

Contact information:

Website: www.obd2store.com
Email: chinaobd2store@gmail.com
Skype: sales-obd2store@outlook.com
Whatapp: +86-13682550935

2018年9月14日星期五

OPCom Firmware 1.99 For Opel Opcom OP-Com 2012V Can OBD2 Diagnostic Interface with PIC18F458 Chip and FTDI Chip program supports many control units

OPCom Firmware 1.99 support read out and clear fault codes. Opel Opcom OP-Com 2012V Can OBD2 Diagnostic Interface Support Opel Till Year 2014. OBD2Store.com OPCom Firmware 1.99 For Opel Opcom OP-Com 2012V Can OBD2 Diagnostic Interface with PIC18F458 Chip and FTDI Chip program supports many control units.

OPCom Firmware 1.99 For Opel Opcom OP-Com 2012V Can OBD2 Diagnostic Interface with PIC18F458 Chip and FTDI Chip Support Opel Till Year 2014

http://www.obd2store.com/opcom-firmware-199-for-opel-opcom-opcom-2012v-can-obd2-diagnostic-interface-with-pic18f458-chip-and-ftdi-chip-support-opel-till-year-2014-p-2282.html

OBD2Store.com OPCom Firmware 1.99 Function:

1. It covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
2. The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test.
3. The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.
4. Since Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.
PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
5. Fault codes will be shown with all available information:

OBD2Store.com V1.99 OPCOM China clone Opel Opcom OP-Com 2012V Can OBD2 Diagnostic Interface highlights:


1. Language: English

2. Software Version: 120309a     Hardware Version: 1.99

3. OP-COM - PC based Opel diagnostic tool, work on Opel till year 2014

4. With PIC18F458 Chip, work more stable

5. It can work on both Windows XP and 7 now

6. Opel Opcom 120309a Software Download for Free

OBD2Store.com-- China OBD2 Tool, Automotive Diagnostic Tools, Car Key Programmer, OBD2 ECU chip tuning tool Center.

Contact information:

Website: www.obd2store.com
Email: chinaobd2store@gmail.com
Skype: sales-obd2store@outlook.com
Whatapp: +86-13682550935

2018年9月13日星期四

Genuine JLR DOIP VCI JLR DOIP Jaguar Land Rover Diagnostic Equipment support JLR land rover pathfinder and JLR SDD software from 2005 to 2018

Genuine JLR DOIP VCI is Wifi JLR Jaguar land rover pathfinder diagnostics Tool. JLR DOIP Jaguar Land Rover Diagnostic Equipment work with JLR DOIP Jaguar Land Rover Diagnostic Equipment. OBD2Store.com Genuine JLR DOIP VCI JLR DOIP Jaguar Land Rover Diagnostic Equipment support JLR land rover pathfinder and JLR SDD software from 2005 to 2018.

Genuine JLR DOIP VCI WIfi Bosch JLR DOIP Jaguar Land Rover Diagnostic Equipment work with JLR land rover pathfinder software

Genuine JLR DOIP VCI

OBD2Store.com Genuine JLR DOIP VCI JLR DOIP Jaguar Land Rover Diagnostic Equipment support JLR land rover pathfinder and JLR SDD software:

1.The obd2store.com LR land rover pathfinder software(You must have an online account to work with it,we don’t offer)

It is the only unit that will be compatible with the Pathfinder software and all JLR vehicles with the new vehicle architectures found in 2018 and newer vehicles (from the Range Rover/Range Rover Sport L405/L494). In addition to the 2018 and newer vehicles, the DoIP VCI will also be capable of interfacing with 2014 through 2018 Multi-CAN architecture vehicles (see application list below).

2.The JLR SDD software(If you want to do programming ,you must have an online account)

1

All 2014-2018 with no DOIP and earlier (2006 to 2014) land rover and Jaguar will still use the SDD JLR software.

The obd2store.com Genuine JLR DOIP VCI is the newest interface for Jaguar and Land Rover vehicles.

It is the only unit that will be compatible with the Pathfinder Software and all JLR vehicles with the new vehicle architectures found in 2018 and newer vehicles (from the Range Rover/Range Rover Sport L405/L494). In addition to the 2018 and newer vehicles.

The DoIP VCI will also be capable of interfacing with 2014 through 2018 Multi-CAN architecture vehicles (see application list below). Vehicles 2014 and older vehicles not detailed here will continue to use the current diagnostic system and VCIs.

OBD2Store.com 2014-2018 JLR DoIP VCI support Applications:

XE (X760)
F-Pace (X761)
F-Type (X152)
XF (X260)
XJ (X351) – 16MY only
Evoque (L538)
Discovery Sport (L550)
Range Rover (L405)
Range Rover Sport (L494)

OBD2Store.com-- China OBD2 Tool, Automotive Diagnostic Tools, Car Key Programmer, OBD2 ECU chip tuning tool Center.

Contact information:


Website: www.obd2store.com
Email: chinaobd2store@gmail.com
Skype: sales-obd2store@outlook.com
Whatapp: +86-13682550935

VAG Audi VW ODIS 4.4.10 Crack Software 5 in 1 ODIS 4.4.10 Download Software Features No Need Activation

VAG Audi VW ODIS 4.4.10 Crack Software with ODIS Engineering 8.2.3 Download, ETKA 8.1, Elsawin 5.3 installed On 320GB HDD. 5 in 1 ODIS 4.4.10 Download Software Support AUDI And VW till 2018. OBD2Store.com VAG Audi VW ODIS 4.4.10 Crack Software 5 in 1 ODIS 4.4.10 Download Software Features No Need Activation.

5 in 1 ODIS 4.4.10 Download Software VAG Audi VW ODIS 4.4.10 Crack Software With ODIS Engineering 8.2.3 Download, ETKA 8.1, Elsawin 5.3 installed On 320GB HDD
http://www.obd2store.com/5-in-1-odis-4410-download-software-vag-audi-vw-odis-4410-crack-software-with-odis-engineering-823-download-etka-81-elsawin-53-installed-on-320gb-hdd-p-2281.html

OBD2Store.com Vas 5054a ODIS 4.4.10 Download Software features:

Software version: Odis 4.4.10
Engineer version: 8.13, ETKA 8.1, Elsawin 5.3
Languages: English, if you need other language, please contact us via email: chinaobd2store@gmail.com to get the customization.

CPU:
32 bit or 64-bit ,need Intel Core i3 or better

2.2GHz or faster core speed

RAM:
4GB RAM minimum

Supported most Volkswagen Group Car Models: VW, AUDI, SKODA (1996-Present), include Lamborghini and Bentley database
Software no need activation, can directly use.

OBD2Store.com VAG ODIS 4.4.1 Crack Software Support models:

AUDI till 2018

VW till 2018

Skoda

Bentley

Lamborghini

OBD2Store.com-- China OBD2 Tool, Automotive Diagnostic Tools, Car Key Programmer, OBD2 ECU chip tuning tool Center.

Contact information:

Website: www.obd2store.com
Email: chinaobd2store@gmail.com
Skype: sales-obd2store@outlook.com
Whatapp: +86-13682550935

2018年9月12日星期三

Cummins INLINE 7 Data Link Adapter New Cummins Truck Diagnostic Tool with Cummins Insite 8.3 Download Software Release

Cummins INLINE 7 Data Link Adapter is New Cummins engine diagnostic tool has a faster processor. Cummins INLINE 7 Cummins Truck Diagnostic Tool supports USB, WiFi and Bluetooth technologies in a single device. OBD2Store.com Cummins INLINE 7 Data Link Adapter New Cummins Truck Diagnostic Tool with Cummins Insite 8.3 Download Software Release.

Cummins INLINE 7 Data Link Adapter with Cummins Insite 8.3 Download Software For Cummins Diesel Truck Engines
Cummins INLINE 7

New Cummins Diesel Truck Engines diagnostic tool Cummins INLINE 7 Data Link Adapter from obd2store.com has a faster processor, more robust algorithms, larger memory buffers and more sophisticated filtering than previous models while simultaneously accessing multiple vehicle data channels. INLINE 7 supports USB, WiFi and Bluetooth technologies in a single device. INLINE 7 communicates with your PC and is designed for future capability with mobile products.

1.Hardware: Cummins INLINE 7 Data Link Adapter

2.Software: OBD2Store.com Cummins Insite 8.3 download software

3.Update Method: update by CDs

4.Multi-language: English(united states)/ Chinese(simplified)/ Danish/ Dutch/ Finnish/ French/ German/ Italian/ Japanese/ Korean/ Norwegian/ Portuguese/ Russian/ Spanish/ Swedish/ Turkish

5.Suggest Operating System: Win7 32 Bit System

6.Connection Method: WIFI/ Bluetooth/ USB

The Heavy Duty Scanner Cummins INLINE 7 data link adapter from obd2store.com communicates with your PC using a Universal Serial Bus (USB) through a standard USB connector as well as through WiFi or Bluetooth. INLINE 7 is fully compliant with the Technology and Maintenance Council’s RP1210 standard and supports three simultaneous CAN connections and offers baud rates of 250k, 500k and 1 megabaud.

OBD2Store.com Cummins INLINE 7 Supports several other protocols:


such as J1708, J1587, ISO 15765, ISO 9141 (K and L line)

The Cummins INLINE 7 DataLink Adapter is designed to function with a wide array of Cummins, OEM and third-party service and information tools, including the following:

Cummins INSITE

Cummins PowerSpec

Detroit Diesel Diagnostic Link

CAT Electronic Technician (On-Highway only)

Navistar® -ServiceMaxx Fleet Pro

Volvo PTT

VCAD Elite Mack/Volvo

V-Mac Service Tools

Allison DOC® For PC Service Tool

Allison DOC® for Fleets (1000/2000/3000/4000)

Eaton ServiceRanger

Bendix ACom

WABCO Toolbox

Freightliner ServiceLink

International DLB, Intune, and IPC v2.02

International ServiceMaxx

PF-Diagnosis

and many more!

OBD2Store.com-- China OBD2 Tool, Automotive Diagnostic Tools, Car Key Programmer, OBD2 ECU chip tuning tool Center.

Contact information:

Website: www.obd2store.com
Email: chinaobd2store@gmail.com
Skype: sales-obd2store@outlook.com
Whatapp: +86-13682550935

2018年9月11日星期二

VXDIAG MB SD Connect C6 Multiplexer MB Star C6 Benz Diagnostic Tool With Same Functions As Original Mercedes Benz Xentry Diagnosis VCI

VXDIAG MB SD Connect C6 Multiplexer can Replacement MB STAR C4/C5. MB Star C6 Benz Diagnostic Tool software include two versions of PASSTHRU & PDU, including DAS, Xentry software. OBD2Store.com VXDIAG MB SD Connect C6 Multiplexer MB Star C6 Benz Diagnostic Tool With Same Functions As Original Mercedes Benz Xentry Diagnosis VCI.

VXDIAG MB Star C6 Mercedes Benz Xentry Diagnosis VCI Original MB SD Connect C6 Benz Diagnostic Tool with OIP&AUDIO Function Better than MB STAR C4/C5
http://www.obd2store.com/vxdiag-mb-star-c6-mercedes-benz-xentry-diagnosis-vci-original-mb-sd-connect-c6-benz-diagnostic-tool-with-doipaudio-function-better-than-mb-star-c4c5-p-2280.html

OBD2Store.com VXDIAG MB SD Connect C6 Multiplexer MB Star C6 Benz Diagnostic Tool With Same Functions As Original Mercedes Benz Xentry Diagnosis VCI:


1. Support BENZ
2. VXDiag support add more original software in feature, you only need buy authorization from us. Already released original software authorization has BMW,GM, Ford, Mazda,Toyota, Honda, LandRover, Jaguar, Subaru,Volvo,VW,and Porsche.
3. With the innovation design of OBD II intelligent bus protocol routing hardware, a diagnostic plug can be intelligent identification test all  models, fully meet the future  demand for all kinds of bus communication
4. VXDiag Multi Diagnostic Tool can compatible with original BENZ software if you have, we also provide software Hard disk which can compatible with CF-30 and THINKPAD T420 laptop.( at least 2GB memory, recommend 4GB memory)
5. Hardware support 4-way CAN BUS and 2-way K - Line/L-Line, support multi-protocol high-speed and concurrent communication

OBD2Store.com VXDIAG Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface MB SD Connect C6 function introduction
 

Benz software include two versions of PASSTHRU & PDU,including DAS,Xentry software.Version of PDU support new car models of 222,213,205 etc,other car models need to usepassthru version to diagnose. Not support old models of 210,203,220 with K-Line communication. It support connections of WIFI,LAN and USB.

OBD2Store.com-- China OBD2 Tool, Automotive Diagnostic Tools, Car Key Programmer, OBD2 ECU chip tuning tool Center.

Contact information:

Website: www.obd2store.com
Email: chinaobd2store@gmail.com
Skype: sales-obd2store@outlook.com
Whatapp: +86-13682550935

2018年9月9日星期日

Super MB Star C3 Diagnostic Tool Quality A Mercedes Star Diagnosis Compact 3 can not work on new Mercedes W205 Error Solution

Super MB Star C3 Diagnostic Tool Support benz trucks and new types of mercedes cars. Quality A Mercedes Star Diagnosis Compact 3 can work with new v2018.9 MB Star C3 Download Software. OBD2Store.com sharing Super MB Star C3 Diagnostic Tool Quality A Mercedes Star Diagnosis Compact 3 can not work on new Mercedes W205 Error Solution.

Super MB Star C3 Pro Mercedes Benz Star C3 Diagnostic Tool Mercedes C3 Multiplexer


User puzzles:

I have installed Xentry 9.2014 in obd2store.com MB Star C3 multiplexer. It works well so far. Now, I need to make diagnosis on mercedes w205 year 12/2014 but It can not communicate with the car. C3 don’t work in all recent cars in xentry but in DAS is ok.

Experienced users’suggestion:

C3 has many limitation regarding latest vehicles in Xentry.
It can’t diagnose it e.g w205, w212, w222, w906, smart 453 etc.

its glory is already passed unless you deal only with vehicles in DAS.
you have to change to MB SD Connect C4.
C4’s support also officially has been stop since 12-2015.

It is no different even you change folder.
it is different protocol with recent vehicles.

For your w205 (nice car) you can use one of this :
1.sd connect c4
2.xentry sd connect c5

Both good at all new Mercedes Benz models,W222, W221, W212, W203, 211,W 204,W207, W212, GL166, B 246, CLS 218, SLK172 and Smart405, 451, 452, 454

Besides the MB Star diagnosis software c3 and c4 own, sdconnect c4/c5 added three more software: SD Media, Xentry and Smart TAN Code.
SD Media: Video and PDF lessons;
Xentry: New software released by Benz Company after 04/2009 by diagnosis new cars. Xentry software for diagnosing W 204,W207 and W212 which C3 and C4 does not support;
Smart TAN Code: Opened special function in DAS program with Smart cars 405/ 451/452/ 454.Besides, it also opened more special functions, such as engineer mode, remove limitations,etc, which Star C3 and Star C4 do not have.

I have successfully communicated wit my w205 AMG using a MB SD C4 connect all controllers accessed.

OBD2Store.com-
- China OBD2 Tool, Automotive Diagnostic Tools, Car Key Programmer, OBD2 ECU chip tuning tool Center.

Contact information:


Website: www.obd2store.com
Email: chinaobd2store@gmail.com
Skype: sales-obd2store@outlook.com
Whatapp: +86-13682550935

Super MB Star C3 Diagnostic Tool Quality A Mercedes Star Diagnosis Compact 3 can not work on new Mercedes W205 Error Solution

Super MB Star C3 Diagnostic Tool Support benz trucks and new types of mercedes cars. Quality A Mercedes Star Diagnosis Compact 3 can work with new v2018.9 MB Star C3 Download Software. OBD2Store.com sharing Super MB Star C3 Diagnostic Tool Quality A Mercedes Star Diagnosis Compact 3 can not work on new Mercedes W205 Error Solution.

Super MB Star C3 Pro Mercedes Benz Star C3 Diagnostic Tool Mercedes C3 Multiplexer


User puzzles:

I have installed Xentry 9.2014 in obd2store.com MB Star C3 multiplexer. It works well so far. Now, I need to make diagnosis on mercedes w205 year 12/2014 but It can not communicate with the car. C3 don’t work in all recent cars in xentry but in DAS is ok.

Experienced users’suggestion:

C3 has many limitation regarding latest vehicles in Xentry.
It can’t diagnose it e.g w205, w212, w222, w906, smart 453 etc.

its glory is already passed unless you deal only with vehicles in DAS.
you have to change to MB SD Connect C4.
C4’s support also officially has been stop since 12-2015.

It is no different even you change folder.
it is different protocol with recent vehicles.

For your w205 (nice car) you can use one of this :
1.sd connect c4
2.xentry sd connect c5

Both good at all new Mercedes Benz models,W222, W221, W212, W203, 211,W 204,W207, W212, GL166, B 246, CLS 218, SLK172 and Smart405, 451, 452, 454

Besides the MB Star diagnosis software c3 and c4 own, sdconnect c4/c5 added three more software: SD Media, Xentry and Smart TAN Code.
SD Media: Video and PDF lessons;
Xentry: New software released by Benz Company after 04/2009 by diagnosis new cars. Xentry software for diagnosing W 204,W207 and W212 which C3 and C4 does not support;
Smart TAN Code: Opened special function in DAS program with Smart cars 405/ 451/452/ 454.Besides, it also opened more special functions, such as engineer mode, remove limitations,etc, which Star C3 and Star C4 do not have.

I have successfully communicated wit my w205 AMG using a MB SD C4 connect all controllers accessed.

OBD2Store.com-
- China OBD2 Tool, Automotive Diagnostic Tools, Car Key Programmer, OBD2 ECU chip tuning tool Center.

Contact information:


Website: www.obd2store.com
Email: chinaobd2store@gmail.com
Skype: sales-obd2store@outlook.com
Whatapp: +86-13682550935

2018年9月6日星期四

Carprog 8.21 Online Version with Carprog 10.93 Software Carprog CRC32 Check failed Error Solution

Carprog 8.21 Online Version contains much more authorizations than other versions. Carprog 8.21 Online Version software includes Carprog 8.21 onlie software and Carprog 10.93 offline software. Soe Customers May met Carprog CRC32 Check failed Problem. Below OBD2Store.com sharing Carprog 8.21 Online Version with Carprog 10.93 Software Carprog CRC32 Check failed Error Solution.

Carprog 8.21 Online Version Carprog 8.21 Airbag Reset With Carprog 8.21 Firmware And Carprog 10.93 Software


carprog 8.21 online

Problem:


The obd2store.com Carprog 8.21 Online Version full program prompt the warn massage Carprog“CRC32 Check failed” as below pic:



OBD2Store.com Carprog 8.21 Online Version with Carprog 10.93 Software Carprog CRC32 Check failed Error Solution:

Download the carprog.vws.zip from below link:

https://mega.nz/#!Cpl1Aaoa!I0aQtrK_YD8toiv0ks1vuCzjo7OjuMYO9VgqFY-Vfus

After downloading completely, extract the zip file and replace the original “carprog.vws” file with this new one.

Done!

OBD2Store.com--
China OBD2 Tool, Automotive Diagnostic Tools, Car Key Programmer, OBD2 ECU chip tuning tool Center.

Contact information:


Website: www.obd2store.com
Email: chinaobd2store@gmail.com
Skype: sales-obd2store@outlook.com
Whatapp: +86-13682550935

Scania SDP3 2.36 Download Software Scania SDP3 2.36 Crack Software with Free Free Scania SDP3 2.36 Activation Services For Sale

Scania SDP3 2.36 Download Software is Scania diagnostic software works with scania vci-3 vci 3 scanner. Scania SDP3 2.36 Crack Software support the electrical system with CAN communication. OBD2Store.com Scania SDP3 2.36 Download Software Scania SDP3 2.36 Crack Software with Free Free Scania SDP3 2.36 Activation Services For Sale.

V2.36 Scania SDP3 Download Software Scania SDP3 2.36 Crack Software Without USB Dongle

http://www.obd2store.com/v236-scania-sdp3-download-software-scania-sdp3-236-crack-software-without-usb-dongle-p-2043.html

OBD2Store.com Scania SDP3 2.36 Download Scania SDP3 2.36 Crack Software:

https://mega.nz/#!CNICwK6K!z7b1_aX22CEQmCvCUu-eOnxom8HZc07KK9_Vu8hnSjQ    (password: @scania@)

Scania SDP3 2.36 Crack Software works with scania vci-3 vci 3 scanner:

Highest level access
Internal Scania
Industry & Marine
Authorized Scania Workshops
Bodybuilder

OBD2Store.com Scania SDP3 2.36 Download Software Supported Languages:

English, German, Spanish, French, Japanese, Dutch, Persian, Polish, Portuguese, Swedish, Norwegian, Suomi, Turkish, Italian, Czech, Russian, Chinese.

OBD2Store.com-- China OBD2 Tool, Automotive Diagnostic Tools, Car Key Programmer, OBD2 ECU chip tuning tool Center.

Contact information:

Website: www.obd2store.com
Email: chinaobd2store@gmail.com
Skype: sales-obd2store@outlook.com
Whatapp: +86-13682550935

2018年9月5日星期三

JIA XUN MS8211 Automotive circuit tester Car Digital Multimeter JIA XUN MS8211 Auto Circuit Tester can test pulse signal function

JIA XUN MS8211 Automotive circuit tester Car Digital Multimeter can accurately detect the auto circuit fault. JIA XUN MS8211 Auto Circuit Tester with 4 in 1 functions of multimeter, test lamp, lighting lamp and probe. OBD2Store.com JIA XUN MS8211 Automotive circuit tester Car Digital Multimeter JIA XUN MS8211 Auto Circuit Tester can test pulse signal function.

JIA XUN MS8211 Automotive Circuit Tester Detector Jiaxun MS8211 Digital Multimeter 4 in 1 functions of multimeter, test lamp, lighting lamp and probe
http://www.obd2store.com/images/JIA%20XUN%20MS8211.jpg

OBD2Store.com JIA XUN MS8211 Automotive circuit tester Car Digital Multimeter Description:


The high quality car set multiple gears will be suitable for the detection of various cars faults. Car electric circuit’s tester multi-meter is suitable for each car maintenance environment, applicable to the maintenance of car circuit, and used for the decorations in relation to automobile circuit.

JIA XUN MS8211 Automotive Circuit Tester Detector from obd2store.com Feature:

Conform to the IEC1010-1 standard CAT III 600V
The over molding rubber case protects the meter
Retractable tip for safe storage
2000 counts LCD display
Auto/manual range
Maximum value hold
Data hold
Auto power off
Non-contact AC voltage of special frequency
The sensitivity of AC voltage adjusted
Sound and flash alarming
Continuity test
Diode test

JIA XUN MS8211 Auto Circuit Tester from obd2store.com key features:
1.It can accurately detect various line faults under the situation of no damage to rubber cover.
2. It sets multimeter & test lamp gear which has the functions that the top-level multimeter fails to do. It specially detects the wires with bad contact and aging wires.
3. It can detect each fault in the place where the space is narrow and light is weak.

OBD2Store.com-- China OBD2 Tool, Automotive Diagnostic Tools, Car Key Programmer, OBD2 ECU chip tuning tool Center.

Contact information:
Website: www.obd2store.com
Email: chinaobd2store@gmail.com
Skype: sales-obd2store@outlook.com
Whatapp: +86-13682550935

2018年9月4日星期二

How To Use Quality A BMW ICOM NEXT A + B + C Wifi ICOM Next BMW Diagnostic And Programming Tool

Quality A BMW ICOM NEXT A + B + C work with BMW/MINIs using an OBDII connection. Wifi ICOM Next BMW Diagnostic And Programming Tool For BMW, MINI, Rolls-Royce BMW-Model. Need BMW ICOM NEXT A + B + C User Manual. Below OBD2Store.com sharing How To Use Quality A BMW ICOM NEXT A + B + C Wifi ICOM Next BMW Diagnostic And Programming Tool.

Best Quality BMW ICOM NEXT A + B + C Wifi ICOM Next BMW Diagnostic And Programming Tool Firmware Update To V1.40
http://www.obd2store.com/best-quality-bmw-icom-next-a-b-c-wifi-icom-next-bmw-diagnostic-and-programming-tool-firmware-update-to-v140-p-2253.html

OBD2Store.com How To Use Quality A BMW ICOM NEXT A + B + C Wifi ICOM Next BMW Diagnostic And Programming Tool

1.Connect the car with obd2store.com BMW ICOM NEXT A + B + C or icom a2;
2. Connect the icom lan-cable with the computer when the system light stop flashing.Otherwise, the icom ista-p program will shut off automatically if you have firstly connected the device with the computer directly.
Expert Mode with NCS, E-SYS and so on
Eeay to install...only thing you need to do is insert it into laptop!!!
No need dongle
If you need to do programming job, please make sure your laptop has 4GB ram at least.
How to Update BMW ICOM NEXT Firmware?
First, install ISTA-D software on your system so you can use it to install the firmware on your ICOM.
Next, start ISTA-D with ICOM next bmw from obd2store.com connected to your car (Don’t need KL15, KL30 13.8V on pin 16 and ground on 4+5 is enough)
Then, go to connection manager and start the update.

OBD2Store.com-- China OBD2 Tool, Automotive Diagnostic Tools, Car Key Programmer, OBD2 ECU chip tuning tool Center.

Contact information:

Website: www.obd2store.com
Email: chinaobd2store@gmail.com
Skype: sales-obd2store@outlook.com
Whatapp: +86-13682550935

2018年9月3日星期一

FVDI 2018 Abrites Commander 2018 FVDI Commander Full Package With 18 FVDI Software covers most functions of VVDI2

FVDI 2018 Abrites Commander Covers VVDI2 FVDI 2016 FVDI 2015 FVDI 2014 Function. 2018 FVDI Commander Full Package With 18 FVDI Software No Time Limitation. OBD2Store.com FVDI 2018 Abrites Commander 2018 FVDI Commander Full Package With 18 FVDI Software covers most functions of VVDI2.

Original FVDI 2018 Abrites Commander Fly FVDI 2018 Full Package With 18 Softwares Unlimited Tokens Covers VVDI2 FVDI 2016 FVDI 2015 FVDI 2014 Function




OBD2Store.com FVDI 2018 Abrites Commander 2018 FVDI Commander Full Package With 18 FVDI Software:

1. ABRITES Commander for VAG V18.0 and V24.0 (For Volkswagen, For AUDI, For For Seat, For For Skoda)

2. ABRITES Commander for FOR BMW V10.4 (FOR BMW, Mini)

3. ABRITES Commander for Mercedes/Maybach/Smart V5.11 and V7.0 (Mercedes, Maybach, Smart)

4. ABRITES Commander for Renault V5.2 and V6.3 (Renault, Dacia)

5. ABRITES Commander for Peugeot/Citroen V5.10 and V6.7 (Peugeot, Citroen)

6. ABRITES Commander for FIAT/LANCIA/ALFA V5.1 and V5.7 (FIAT, LANCIA, ALFA ROMEO)

7. ABRITES Commander for Opel/Vauxhall V5.8 and V6.6 (Opel, Vauxhall)

8. ABRITES Commander for Ford V4.9

9. ABRITES Commander for Chrysler/Jeep/Dodge V3.3 (Chrysler, Jeep, Dodge)

10. ABRITES Commander for For Porsche V4.1

11. ABRITES Commander for Toyota/Lexus/ Scion V9.0 (Toyota, Lexus, Scion)

12. ABRITES Commander for Nissan V4.3 (Nissan, Infiniti)

13. ABRITES Commander for Hyundai/Kia V2.1 (Hyundai, Kia)

14. ABRITES Commander for Volvo V4.3

15. ABRITES Commander for Mitsubishi V2.1

16. ABRITES Commander for DAF V1.0

17. ABRITES Commander for Bikes/Snowmobiles/Water scooters V1.2

18. ABRITES Commander for TAG Key Tool V6.2

OBD2Store.com-- China OBD2 Tool, Automotive Diagnostic Tools, Car Key Programmer, OBD2 ECU chip tuning tool Center.

Contact information:


Website: www.obd2store.com
Email: chinaobd2store@gmail.com
Skype: sales-obd2store@outlook.com
Whatapp: +86-13682550935

VVDI Prog New Update History VVDI PROG Key Programmer Software And Firmware Update Guide

VVDI Prog New Update Version 4.7.4 Xhorse VVDI PROG Key Programmer New Release. VVDI PROG Key Programmer with V4.7.4 Xhorse VVDI PROG Software and V2.0.0 VVDI Prog Firmware. OBD2Store.com sharing VVDI Prog New Update History VVDI PROG Key Programmer Software And Firmware Update Guide.

VVDI Prog New Update VVDI PROG Key Programmer With V4.7.4 Xhorse VVDI PROG Software Get Free BMW ISN Read Function and NEC, MPC, Infineon etc Chip Consequent

vvdi prog

How to Do OBD2Store.com VVDI PROG Key Programmer Update:

1. This function require internet support, Connect the obd2store.com vvdi prog device with the USB wire for the computer

2. Click the “Upgrade” button enter the upgrade interface, show as following picture
vvdi prog update
Enter update interface, if software show ”communication with server failed”,
please close your Anti-virus and computer firewall and retry. If software
show “unable to find equipment”, please reconnect device
Tip information show the latest software version and upgrade information
Device information show the device SN, device firmware version and the
latest firmware version

V2.0.0 VVDI Prog Firmware Firmware Update Guide:

1. Select obd2store.com V2.0.0 VVDI Prog firmware version
2. Click “Start Firmware Upgrade” button
3. Don’t close or pull out USB cable before upgrade finished

V4.7.4 Xhorse VVDI PROG Software Update Guide:


1. Click “Software Link 1” or “Software Link 2” button, download software
from the web
2. Extract the file

OBD2Store.com VVDI Prog New Update History:

VVDI PROG latest software version V4.7.4 update(2018-08-27)

* This version DON't need update firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.7.4 version in Doc folder
+ Add MX25L512E, MX25L1005, MX25L1025, MX25L1006, MX25L1026, MX25L2005, MX25L2006, MX25L2025, MX25L2026, MX25L4005, MX25L4006, MX25L4025,
MX25L4026, MX25L4033, MX25L4035, MX25L8005, MX25L8006, MX25L8025, MX25L8032, MX25L8035, MX25L8036, MX25L8073, MX25L1602, MX25L1605, MX25L1606,
MX25L1608, MX25L1633, MX25L1635, MX25L1636, MX25L1655, MX25L1673, MX25L3205, MX25L3206, MX25L3208, MX25L3225, MX25L3235, MX25L3236, MX25L3239,
MX25L3255, MX25L3273, MX25L6405, MX25L6406, MX25L6408, MX25L6435, MX25L6436, MX25L6445, MX25L6446, MX25L6455, MX25L6465, MX25L6473, MX25L12805,
MX25L12833, MX25L12835, MX25L12836, MX25L12845, MX25L12865, MX25L12873 options in <1-EEPROM&FLASH>-><MXIC>
+ Add MX25L1025(CLIP), MX25L512E(CLIP), MX25L1005(CLIP), MX25L1006(CLIP), MX25L1026(CLIP), MX25L2005(CLIP), MX25L2006(CLIP), MX25L2025(CLIP), MX25L2026(CLIP), MX25L4005(CLIP),
MX25L4006(CLIP), MX25L4025(CLIP), MX25L4026(CLIP), MX25L4033(CLIP), MX25L4035(CLIP), MX25L8005(CLIP), MX25L8006(CLIP), MX25L8008(CLIP), MX25L8025(CLIP), MX25L8032(CLIP),
MX25L8035(CLIP), MX25L8036(CLIP), MX25L8073(CLIP), MX25L1602(CLIP), MX25L1605(CLIP), MX25L1606(CLIP), MX25L1608(CLIP), MX25L1633(CLIP), MX25L1635(CLIP), MX25L1636(CLIP),
MX25L1655(CLIP), MX25L1673(CLIP), MX25L3205(CLIP), MX25L3206(CLIP), MX25L3208(CLIP), MX25L3225(CLIP), MX25L3236(CLIP), MX25L3239(CLIP), MX25L3255(CLIP), MX25L3273(CLIP),
MX25L6405(CLIP), MX25L6406(CLIP), MX25L6408(CLIP), MX25L6435(CLIP), MX25L6436(CLIP), MX25L6445(CLIP), MX25L6446(CLIP), MX25L6455(CLIP), MX25L6465(CLIP), MX25L6473(CLIP),
MX25L12805(CLIP), MX25L12833(CLIP), MX25L12835(CLIP), MX25L12836(CLIP), MX25L12845(CLIP), MX25L12865(CLIP),
MX25L12873(CLIP) options in <1-EEPROM&FLASH>-><MXIC(CLIP)>(Need EEPROM CLIP ADAPTER)
+ Add W25P10, W25P20, W25P16, W25P32, W25P40, W25P64, W25P80, W25Q10, W25Q16, W25Q20, W25Q32, W25Q40, W25Q64, W25Q80, W25X10, W25X16, W25X20,
W25X32, W25X40, W25X64, W25X80, W25P128, W25Q128, W25X128 options in <1-EEPROM&FLASH>-><WINBOND>
+ Add W25P10(CLIP), W25P16(CLIP), W25P20(CLIP), W25P32(CLIP), W25P40(CLIP), W25P64(CLIP), W25P80(CLIP), W25Q10(CLIP), W25Q16(CLIP), W25Q20(CLIP),W25Q32(CLIP),
W25Q40(CLIP), W25Q64(CLIP), W25Q80(CLIP), W25X10(CLIP), W25X16(CLIP), W25X20(CLIP), W25X32(CLIP), W25X40(CLIP), W25X64(CLIP), W25X80(CLIP), W25P128(CLIP),
W25Q128(CLIP), W25X128(CLIP) options in <1-EEPROM&FLASH>-><WINBOND(CLIP)> (Need EEPROM CLIP ADAPTER)
+ Add XC886CM-8FFI-5V, XC886-6FFI-5V, XC886-8FFI-5V, XC886C-6FFI-3.3V, XC886C-6FFI-5V, XC886C-8FFI-5V, XC886CM-6FFI-5V, XC886LM-6FFI-3.3V, XC886LM-6FFI-5V, XC888-6FFI-5V,
XC888-8FFI-5V, XC888C-8FFI-5V, XC888CLM-8FFI-5V, XC888CM-8FFI-5V, XC888LM-8FFI-5V, XC888CM-8FFI-3.3V, XC888LM-8FFI-3.3V, XC878CM-16FFI-5V, XC878M-13FFI-3.3V, XC878M-13FFI-5V,
XC878M-16FFI-3.3V, XC878M-16FFI-5V, XC878-13FFI-3.3V, XC878-13FFI-5V, XC878-16FFI-5V, XC878CM-13FFI-5V, XC878CM-16FFI-3.3V, XC858CA-16FFI-5V, XC858CA-13FFI-5V options in
<2-MCU>-><INFINEON-XC8XXXX>
+ Add ALSVIN(2012) option in <4-IMMOBILIZER>-><CHANGAN>
+ Add AUNEAU-DELPHI-48 option in <4-IMMOBILIZER>-><CHANGAN>
+ Add VERNA(2017) option in <5-DASHBOARD>-><HYUNDAI>
+ Add K5(2015) option in <5-DASHBOARD>-><KIA>
+ Add S50(2018) option in <5-DASHBOARD>-><BAICMOTOR>
+ Add SANTAFE option in <7-AIRBAG>-><HAWTAI>
+ Add AVANTE(2017) option in <7-AIRBAG>-><HYUNDAI>
+ Add VV7-AIR-CONTROLLER option in <8-OTHER>-><GREATWALL>
+ Add MUSTANG-LEFT-DOOR-WINDER option in <8-OTHER>-><FORD>
+ Add ROEWE-PDC option in <8-OTHER>-><SAICMOTOR>
+ Add TIGUAN-HEADLIGHT-CONTROLLER option in <8-OTHER>-><VOLKSWAGEN>

VVDIprog v4.7.3(2018-07-27)
* This version DON't need update
  firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.7.3
  version in Doc folder
+ Add CAT1021,
  CAT1022,
  CAT1023,
  CAT1024,
  CAT1025 options in
  <1-EEPROM&FLASH>->
+ Add CAT1021(CLIP),
  CAT1022(CLIP),
  CAT1023(CLIP),
  CAT1024(CLIP),
  CAT1025(CLIP) options in
  <1-EEPROM&FLASH>->
+ Add M25P10, 
  M25P16,
  M25P20,
  M25P32,
  M25P40,
  M25P64,
  M25P128,
  M25P80 options in
  <1-EEPROM&FLASH>->
+ Add MC9S12ZVH64,
  MC9S12ZVH128,
  MC9S12ZVHL32,
  MC9S12ZVHL64,
  MC9S12ZVL8,
  MC9S12ZVL16,
  MC9S12ZVL32,
  MC9S12ZVL64,
  MC9S12ZVL96,
  MC9S12ZVL128,
  MC9S12ZVLA64,
  MC9S12ZVLA96,
  MC9S12ZVL128,
  MC9S12ZVLS16,
  MC9S12ZVLS32,
  MC9S12ZVM16,
  MC9S12ZVM32,
  MC9S12ZVMA16,
  MC9S12ZVMA32,
  MC9S12ZVMAL16,
  MC9S12ZVMAL32,
  MC9S12ZVMB48,
  MC9S12ZVMB64,
  MC9S12ZVMBA48,
  MC9S12ZVMBA64,
  MC9S12ZVMC64,
  MC9S12ZVMC128,
  MC9S12ZVMC256,
  MC9S12ZVML31,
  MC9S12ZVML32,
  MC9S12ZVML64,
  MC9S12ZVML128,
  MC9S12ZVFP64,
  MC9S12ZVC64,
  MC9S12ZVC96,
  MC9S12ZVC128,
  MC9S12ZVC192,
  MC9S12ZVCA64,
  MC9S12ZVCA96 options in
  <2-MCU>->
+ Add EC820-BCM option in
  <4-IMMOBILIZER>->  
+ Add FENGJUN-6 option in
  <5-DASHBOARD>-> 
+ Add VW21(R7F7010713) option in
  <7-AIRBAG>-> 
+ Add W204-FRONT-SAM-MODULE option in
  <8-OTHER>-> 
+ Add W221-AIR-CONTROLLER option in
  <8-OTHER>->
+ Add W221-SEAT-COMPUTER option in
  <8-OTHER>->
+ Add W221-FRONT-SAM-COMPUTER option in
  <8-OTHER>->  
+ Add AIRBAG-F-CHASSIS option in
  <8-OTHER>->  
+ Add GATEWAY(XC2060M-104) option in
  <8-OTHER>-> 

VVDIprog v4.7.1 (2018-05-29)
* This version DON't need update
firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.7.1
version in Doc folder
+ Add PIC12F508,
PIC12F509,
PIC12F510,
PIC12F519,
PIC12F609,
PIC12HV609,
PIC12HV615,
PIC12F615,
PIC12F617,
PIC12F1571,
PIC12(L)F1571,
PIC12(L)F1572,
PIC12F1572,
PIC12F1612,
PIC12F1822,
PIC12F1840,
PIC12F752 options in
<2-MCU>->
+ Add PIC16F505,
PIC16(L)F1823,
PIC16(L)F1824,
PIC16(L)F1825,
PIC16(L)F1826,
PIC16(L)F1827,
PIC16(L)F1828,
PIC16(L)F1829,
PIC16(L)F1847,
PIC16(L)F1613,
PIC16(L)F1614,
PIC16(L)F1615,
PIC16(L)F1618,
PIC16(L)F1619,
PIC16(L)F1508,
PIC16(L)F1509,
PIC16(L)F1503,
PIC16(L)F1507,
PIC16F610,
PIC16F616,
PIC16HV610,
PIC16HV616,
PIC16(L)F1512,
PIC16(L)F1513,
PIC16(L)F1516,
PIC16(L)F1517,
PIC16(L)F1518,
PIC16(L)F1519,
PIC16(L)F1526,
PIC16(L)F1527,
PIC16(L)F1713,
PIC16(L)F1716,
PIC16(L)F1717,
PIC16(L)F1718,
PIC16(L)F1719,
PIC16(L)F1703,
PIC16(L)F1704,
PIC16(L)F1705,
PIC16(L)F1707,
PIC16(L)F1708,
PIC16(L)F1709,
PIC16(L)F18313,
PIC16(L)F18323,
PIC16(L)F18324,
PIC16(L)F18344,
PIC16(L)F17325,
PIC16(L)F17345,
PIC16(L)F18326,
PIC16(L)F18346,
PIC16F72,
PIC16F54,
PIC16(L)F1946,
PIC16(L)F1936,
PIC16(L)F1937,
PIC16(L)F1933,
PIC16(L)F1934,
PIC16(L)F1938,
PIC16(L)F1939,
PIC16(L)F1947,
PIC16LF1906,
PIC16LF1907,
PIC16LF1903,
PIC16LF1904,
PIC16LF1902,
PIC16F707,
PIC16(L)F1454,
PIC16(L)F1455,
PIC16(L)F1459,
PIC16(L)F1554,
PIC16(L)F1559,
PIC16(L)F1566,
PIC16(L)F1567,
PIC16F506 options in
<2-MCU>->
+ Add PIC18F252,
PIC18F242,
PIC18F442,
PIC18F452,
PIC18F248,
PIC18F258,
PIC18F448,
PIC18F458,
PIC18F1220,
PIC18F2220,
PIC18F4220,
PIC18F1320,
PIC18F2320,
PIC18F4320,
PIC18F1230,
PIC18F1330,
PIC18F2221,
PIC18F4221,
PIC18F4321,
PIC18F2321,
PIC18F2331,
PIC18F4331,
PIC18F2431,
PIC18F4431,
PIC18F2423,
PIC18F4423,
PIC18F2523,
PIC18F4523,
PIC18F23K20,
PIC18F43K20,
PIC18F24K20,
PIC18F44K20,
PIC18F25K20,
PIC18F45K20,
PIC18F26K20,
PIC18F46K20,
PIC18F13K22,
PIC18F14K22,
PIC18F2480,
PIC18F4480,
PIC18F2580,
PIC18F4580,
PIC18F2455,
PIC18F4455,
PIC18F2550,
PIC18F4550,
PIC18F2525,
PIC18F4525,
PIC18F2620,
PIC18F4620 options in
<2-MCU>->
+ Add R5F64219,
R5F6421D,
R5F64216,
R5F6421A,
R5F64217,
R5F6421B,
R5F64218,
R5F6421C,
R5F64207,
R5F6420B,
R5F64206,
R5F6420A,
R5F64110,
R5F64114,
R5F64111,
R5F64115,
R5F64112,
R5F64116,
R5F64165,
R5F64166,
R5F64167,
R5F64168,
R5F64169,
R5F6417A,
R5F6417B,
R5F64175,
R5F64185,
R5F64176,
R5F64186,
R5F64177,
R5F64187,
R5F64178,
R5F64188,
R5F64179,
R5F64189,
R5F64116J,
R5F64117J,
R5F64118J,
R5F64116K,
R5F64117K,
R5F64118K,
R5F64116L,
R5F64117L,
R5F64118L,
R5F64116M,
R5F64117M,
R5F64118M,
R5F6442F,
R5F6445F,
R5F6442H,
R5F6445H options in
<2-MCU>->
+ Add CS35(2017) option in
<7-AIRBAG>->
+ Add FIT(2015) option in
<7-AIRBAG>->
+ Add S3(2018) option in
<7-AIRBAG>->
+ Add NEW-SANTAFE option in
<7-AIRBAG>->
+ Add FRM-F-SERIES-XDP512 option in
<8-OTHER>->
+ Add FRM-F-SERIES-XEP100 option in
<8-OTHER>->
+ Add MG_GT_ELEC_POWER_UNIT1(2017) option in
<8-OTHER>->
+ Add MG_GT_ELEC_POWER_UNIT2(2017) option in
<8-OTHER>->

VVDI PROG latest software version V4.7.0 update(2018-04-27)
* This version DON't need update firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.7.0 version in Doc folder
+ Add MSP430F1222, MSP430F1122, MSP430F1132, MSP430F133, MSP430F135, MSP430F147, MSP430F1471, MSP430F148, MSP430F1481,
MSP430F149, MSP430F1491, MSP430F155, MSP430F156, MSP430F157, MSP430F167, MSP430F168, MSP430F169, MSP430F1610, MSP430F1611,
MSP430F1612, MSP430F233, MSP430F235, MSP430F249, MSP430F2491, MSP430F247, MSP430F2471, MSP430F248, MSP430F2481, MSP430F2410,
MSP430F435, MSP430F4351, MSP430F436, MSP430F4361, MSP430F437, MSP430F4371, MSP430F447, MSP430F448, MSP430F4481, MSP430F449,
MSP430F4491 options in <2-MCU>->
+ Add R7F701542, R7F701543, R7F701544, R7F701545, R7F701546, R7F701547, R7F701548, R7F701549, R7F701552, R7F701553, R7F701557,
R7F701560, R7F701561, R7F701562, R7F701563, R7F701564, R7F701565, R7F701566, R7F701567, R7F701568, R7F701569, R7F701572, R7F701573,
R7F701577, R7F701580, R7F701581, R7F701582, R7F701583, R7F701586, R7F701587, R7F701589, R7F701597, R7F701602, R7F701603, R7F701610,
R7F701611, R7F701612, R7F701613, R7F701620, R7F701621, R7F701622, R7F701623 options in <2-MCU>->
+ Add CS75-BODY-COMPUTER option in <4-IMMOBILIZER>->
+ Add IMMO(MSP430F1232) option in<4-IMMOBILIZER>->
+ Add EULOVE(2014) option in <5-DASHBOARD>->
+ Add GOD-ANGEL(2015) option in <5-DASHBOARD>->
+ Add NU-NING(STM8S105C) option in <5-DASHBOARD>->
+ Add AB12CL(R7F701A033) option in <7-AIRBAG>->
+ Add A205-CHASSIS option in <8-OTHER>->
+ Add VIAGGIO(D70F3628) option in <8-OTHER>->
+ Add POWER-AMPLIFIER option in <8-OTHER>->

VVDI PROG latest software version 4.6.9 update (2018-03-27)
* This version DON't need update firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.6.9 version in Doc folder
+ Add MC9S12VR16, MC9S12VR32, MC9S12VR48, MC9S12VR64 options in <2-MCU>->
+ Add R7F701002, R7F701003, R7F701006, R7F701007, R7F701008, R7F701009, R7F701010, R7F701011, R7F701012,
R7F701013, R7F701014, R7F701015, R7F701016, R7F701017, R7F701018, R7F701019, R7F701020, R7F701021, R7F701023,
R7F701024, R7F701025, R7F701022, R7F701026, R7F701027, R7F701028, R7F701029, R7F701030, R7F701033, R7F701034,
R7F701041, R7F701040, R7F701042, R7F701043, R7F701044, R7F701045, R7F701046, R7F701047, R7F701048, R7F701049,
R7F701050, R7F701051, R7F701052, R7F701053, R7F701054, R7F701055, R7F701056, R7F701057, R7F701401, R7F701A03,
R7F701402, R7F701403, R7F701404, R7F701405, R7F701406, R7F701407, R7F701408, R7F701410, R7F701411, R7F701412,
R7F701422, R7F701423, R7F701428, R7F701430, R7F701431, R7F701432 options in <2-MCU>->
+ Add MOTORCYCLE(2016) option in <4-IMMOBILIZER>->
+ Add MG-GS-BCM(2017) option in <4-IMMOBILIZER>->
+ Add KVM option in <4-IMMOBILIZER>->
+ Add ALSVIN-V5(2014) option in <5-DASHBOARD>->
+ Add CHANGAN-STAR-3(2016) option in <5-DASHBOARD>->
+ Add LANDWIND-X7 option in <5-DASHBOARD>->
+ Add WULINGHONGGUANG-S option in <5-DASHBOARD>->

VVDI PROG latest software version V4.6.7 update(2018-01-27)
* This version DON't need update firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.6.7 version in Doc folder
* ESW3 change Read/Write mode
+ Add 25LC010, 25LC020, 25LC040, 25LC080, 25LC160, 25LC320, 25LC640, 25LC128, 25LC256, 25LC512 options in <1-EEPROM&FLASH>->
+ Add TC97010(CLIP) option in <1-EEPROM&FLASH>->
+ Add MB91F060, MB91F062, MB91F067, MB91F575, MB91F577, MB91F578C, MB91F579C, MB91F591B, MB91F592B, MB91F594B, MB91F596B, MB91F597B,
MB91F599B, MB91F59AC, MB91F59BC options in <2-MCU>->
+ Add MC68HC05E6 option in <2-MCU>->
+ Add W203(AM29F400BB) option in <3-ECU>->
+ Add ME7 option in <3-ECU>->
+ Add IAW 4AC.A4 option in <3-ECU>->
+ Add EIS-W203-1J35D(ADAPTER), EIS-W203-1J74Y(ADAPTER), EIS-W203-2J74Y(ADAPTER), EIS-W203-3J74Y(ADAPTER), EIS-W203-4J74Y(ADAPTER),
EIZ-W209-HC12(ADAPTER), EIZ-W211-HC12(ADAPTER), EIZ-W209-ST12(ADAPTER), EIZ-W211-ST12(ADAPTER), EIZ-W215-ST12(ADAPTER), EIZ-W220-ST12(ADAPTER),
EIZ-W230-ST12(ADAPTER), EIZ-W164-ST12(ADAPTER), EIZ-W169-V1-ST12(ADAPTER), EIZ_VITO_ST12(ADAPTER), EIZ_SPRINGTER(ADAPTER), EIS-W639-0L02M(ADAPTER),
EIS-W639-1L02M(ADAPTER), EIS-W639-3K85K(ADAPTER), EIS-W639-1J35D(ADAPTER), EIS-W639-4J74Y(ADAPTER), HC05E6_REMOTE(0F82B) options in <4-IMMOBILIZER>->
+ Add EWS3—KLINE(0D46J)_READ, EWS3—KLINE(0D46J)_WRITE options in <4-IMMOBILIZER>->
+ Add EPICA_BCM(--2009), SAIL_IMMOBOX(--2009) option in <4-IMMOBILIZER>-> (Support read PASSWORD)
+ Add IX35(2015)(MC9S12XD256) option in <4-IMMOBILIZER>->
+ Add OPEL_IMMOBOX(--2009) option in <4-IMMOBILIZER>-> (Support read PASSWORD)
+ Add JETTA_IMMOBOX(--2008) option in <4-IMMOBILIZER>-> (Support read PASSWORD)
+ LINGZHI_M5(2016)(MC9S12HY64) option in <5-DASHBOARD>->
+ LAVIDA_DASHBOARD(D79F3422) option in <5-DASHBOARD>->
+ VERNA(D70F3421) option in <5-DASHBOARD>->
+ TIGGO5(MB91F594BS) option in <5-DASHBOARD>->
+ PRIDE option in <7-AIRBAG>->

VVDI PROG latest software version V4.6.6 update(2017-12-31)

* This version DON't need update firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.6.6 version in Doc folder
* Fix MC9S12XS series write error problem
* Fix EWS3 ADAPTER R&W error problem
* Fix SPC56AP series write error problem
* Fix D70F3356 write error problem
* Upgrade MB91F061 option, support R&W PFLASH
+ Add TMS370C002A, TMS370C010A, TMS370C012A, (Need TMS370(PLCC28) ADPATER) TMS370C020A, TMS370C022A, TMS370C032A, TMS370C040A,
TMS370C042A, (Need TMS370(PLCC44) ADPATER) TMS370C050A, TMS370C052A, TMS370C056A, TMS370C058A,TMS370C256A (Need TMS370(PLCC68) ADPATER)
options in <2-MCU>->
+ SENOVA-D50-BCM option in <4-IMMOBILIZER>->
+ Add REGAL-KG-MODULE(2014) option in <4-IMMOBILIZER>->
+ Add MEGANE-UCH option in <4-IMMOBILIZER>->
+ Add MG-GT-DASHBOARD(2014) option in <5-DASHBORAD>->
+ Add PTS-W221, TRCM-W221 options in <8-OTHER>->
+ Add X5-LCM option in <8-OTHER>->

VVDI PROG latest software version V4.6.5 update(2017-11-27)
* This version DON't need update firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.6.5 version in Doc folder
+ Update V850 D-Flash format conversion tool, support insert with original 64KB file
* Fix EEPROM CLIP ADAPTER R&W some chips error problem
* Fix EWS3 ADAPTER sometimes insertion check error problem
* Fix 35080/D80 ADAPTER erase some 35080VP first 32 Bytesfailed problem
+ Add MC68HC05B32(0D60J), MC68HC05B32(3G96A), MC68HC705B16(1K20C) options in <2-MCU>-> (Need MC68HC05BX ADAPTER)
+ Add MC68HC05X32(0D69J), MC68HC05X32(1D69J), MC68HC05X32(1H52A), MC68HC705X32(0G47V) options in <2-MCU>-> (Need MC68HC05X32 ADAPTER)
+ Add MC68HC05E6(0F82B) option in <2-MCU>->
+ Add EMS6104(AM29F400BB), SIMTEC76(29F400BB) options in <3-ECU>->
+ Add SIMOS9.4(AM29F400BB) option in <3-ECU>->
+ Add IRAN(2014-2017)(29F400BB) option in <3-ECU>->
+ Add BJ40-BCM(2016), E150-BCM, HUANSU-S3-BCM options in <4-IMMOBILIZER>->
+ Add SPRINTER-IMMOBOX(2002-2005) option in <4-IMMOBILIZER>->
+ Add BESTURN-B70-BCM(MC9S12XEG128) option in <4-IMMOBILIZER>->
+ Add BSI option in <4-IMMOBILIZER>->
+ Add ELANTRA-KG-MODULE(MC9S12XEG384) option in <4-IMMOBILIZER>->
+ Add IMMOBOX(STM8AF6288) option in <4-IMMOBILIZER>->
+ Add EXCELLEGT(D70F3423) option in <5-DASHBORAD>->
+ Add ARRIZO7-DASHBOARD(2015)option in <5-DASHBORAD>->
+ Add K50-DASHBOARD(2015) option in <5-DASHBORAD>->
+ Add REGAL-SRS(MC9S12XEG384) option in <7-ARIBAG>->
+ Add ASTRA-SRS option in <7-ARIBAG>->
+ Add SRS-VW61 option in <7-ARIBAG>->
+ Add ISM(ST10F269), S-CLASS-W221-FRONT-SAM options in <8-OTHER>->
+ Add SORENTO-IPM option in <8-OTHER>->
+ Add PASSAT-PDC-MODULE, REAR-VIEW-CAMERA(D70F3356), TIGUAN-KG-MODULE(MC9S12XET256) option in <8-OTHER>->

VVDI PROG latest software V4.6.4 version update (2017-10-26)
* This version DON't need update firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.6.4 version in Doc folder
* Fix EEPROM CLIP ADAPTER R&W some chips error problem
+ Add LACROSSE-BCM(2008) option in <4-IMMOBILIZER>->
+ Add IMMOBOX(STM8AF5268),IMMOBOX(STM8AF6268) options in <4-IMMOBILIZER>->
+ Add ALSVIN-V7(2017) option in<5-DASHBOARD>->
+ Add HAVAL-H6 option in<5-DASHBOARD>->
+ Add E60-KBM, PDC-MODULE options in <8-OTHER>->

VVDI PROG latest software version V4.6.3 update((2017-10-17)
* This version DON't need update firmware
* Fix some bugs
* Fix MC68HC(9)08 series problem
+ Add AM29F200BB-xxE, AM29F200BB-xxF, AM29F200BB-xxS, AM29F200BT-xxE, AM29F200BT-xxF, AM29F200BT-xxS, AM29F400BB-xxE,AM29F400BB-xxF, AM29F400BB-xxS,
AM29F400BT-xxE, AM29F400BT-xxF, AM29F400BT-xxS, AM29F800BB-xxE, AM29F800BB-xxF, AM29F800BB-xxS, AM29F800BT-xxE, AM29F800BT-xxF, AM29F800BT-xxS, AM29F160BBxxE,
AM29F160BBxxF, AM29F160BTxxE,AM29F160BTxxF options in <1-EEPROM&FLASH>-> (Need AM29FXXXB ADAPTER)
+ Add M95M01, M95M02 options in <1-EEPROM&FLASH>->
+ Add M95M01(CLIP), M95M02(CLIP) options in <1-EEPROM&FLASH>-> (Need EEPROM CLIP ADAPTER)
+ Add RFA-UNSECURED(MC9S12XET256), RFA-SECURED(MC9S12XET256) options in <8-OTHER>->

VVDI PROG latest software version V4.6.2 update(2017-09-29)
* This version DON't need update firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.6.2 version in Doc folder
+ Add S29190(SOP8), S29290(SOP8), S29390(SOP8), S29190(DIP8), S29290(DIP8), S29390(DIP8) options in <8-EEPROM&FLASH>->
+ Add S29190(SOP8)(CLIP), S29290(SOP8)(CLIP), S29390(SOP8)(CLIP), S29190(DIP8)(CLIP), S29290(DIP8)(CLIP),S29390(DIP8)(CLIP) options in
<8-EEPROM&FLASH>-> (Need EEPROM CLIP ADAPTER)
+ Add ME7.4.4-FLASH-AM29F400BB, ME7.4.4-EEPROM-95160, ME7.4.9NG-FLASH-ST10F275, ME7.4.9NG-EEPROM-95320, MG7.9.8 options in <3-ECU>->
+ Add HYUNDAI(2005-2014)(AM29BDD160GB), HYUNDAI(2005-2014)(29F400BB), SONATA(2005-06)(S29CDO16J), SONATA(2005-06)(29F400BB) options in <3-ECU>->
+ Add KIA(2005-2014)(AM29BDD160GB), KIA(2005-2014)(29F400BB) options in <3-ECU>->
+ Add IAW-6LPB(ST10F280) option in <3-ECU>->
+ Add 405(ST10F271) option in <3-ECU>->
+ Add RENAULT(2010-2017)(29F400BB) option in <3-ECU>->
+ Add CNG(2010-2014) option in<3-ECU>->
+ Add EIZ-W906(ST12) option in <4-IMMOBILIZER>->
+ Add EWS4.X(ADAPTER) option in <4-IMMOBILIZER>-> (Need EWS4 ADAPTER)
+ Add EXCELLE-GT-BCM(D70F3385), EXCELLE-GT-BCM(D70F3469) options in <4-IMMOBILIZER>->
+ Add CRUZE-BCM(D70F3385) option in <4-IMMOBILIZER>->
+ Add WRANGLER-BCM(2013) option in <4-IMMOBILIZER>->
+ Add EADO(2015) option in <5-DASHBOARD>->
+ Add MALIBU(D70F3426) option in <5-DASHBOARD>->
+ Add EMGRAND option in <5-DASHBOARD>->
+ Add REFINE(2017) option in <5-DASHBOARD>->
+ Add DELONG option in <5-DASHBOARD>->
+ Add ELYSEE-SRS(D70F3624) option in <7-AIRBAG>->
+ Add 301-SRS(D70F3624) option in <7-AIRBAG>->
+ Add SRS-VW51(MC68HC908AZ60A) option in <7-AIRBAG>->
+ Add GEARBOX(29F200BB) option in <8-OTHERS>->
+ Add X-TRAIL-PMM option

VVDI PROG latest software version V4.6.1 update(2017-08-30)
* This version DON't need update firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.6.1version in Doc folder
* Fix MC9S12XS/MC9S12XHY series PFLASH write error problem
* Fix SRS-VW52-V1 diagram
+ Add AT24C01(CLIP),AT24C02(CLIP), AT24C04(CLIP), AT24C08(CLIP), AT24C16(CLIP), AT24C32(CLIP), AT24C64(CLIP), AT24C128(CLIP), AT24C256(CLIP),
AT24C512(CLIP), AT24C1024(CLIP), AT25010(CLIP), AT25020(CLIP), AT25040(CLIP), AT25080(CLIP), AT25160(CLIP), AT25320(CLIP), AT25640(CLIP), AT25128(CLIP),
AT25256(CLIP), AT25512(CLIP), AT93C06[A](CLIP), AT93C46[A](CLIP), AT93C56[A](CLIP), AT93C57[A](CLIP), AT93C66[A](CLIP), AT93C76[A](CLIP),
AT93C86[A](CLIP) options in <1-EEPROM&FLASH>-> (Need EEPROM CLIP ADAPTER)
+ Add CAT24C/W01(CLIP), CAT24C/W02(CLIP), CAT24C/W04(CLIP), CAT24C/W08(CLIP), CAT24C/W16(CLIP), CAT24C/W32(CLIP), CAT24C/W64(CLIP), CAT25C128(CLIP),
CAT25C256(CLIP), CAT93C46[A](CLIP), CAT93C56[A](CLIP), CAT93C57[A](CLIP), CAT93C66[A](CLIP), CAT93C76[A](CLIP), CAT93C86[A](CLIP) options in
<1-EEPROM&FLASH>-> (Need EEPROM CLIP ADAPTER)
+ Add XL[S]24C01(CLIP), XL[S]24C02(CLIP), XL[S]24C04(CLIP), XL[S]24C08(CLIP), XL[S]24C16(CLIP), XL[S]93C/LC06(CLIP), XL[S]93C/LC46(CLIP), XL[S]93C/LC56(CLIP),
XL[S]93C/LC66(CLIP) options in <1-EEPROM&FLASH>-> (Need EEPROM CLIP ADAPTER)
+ Add FM24C02(CLIP), FM24C03(CLIP), FM24C04(CLIP), FM24C08(CLIP), FM24C09(CLIP), FM24C16(CLIP), FM24C17(CLIP), FM93CS06(CLIP), FM93CS46(CLIP), FM93CS56(CLIP),
FM93CS66(CLIP), NM24C02(CLIP), NM24C03(CLIP), NM24C04(CLIP), NM24C05(CLIP), NM24C08(CLIP), NM24C09(CLIP), NM24C16(CLIP), NM24C17(CLIP), NM24U17(CLIP),
NM24C32(CLIP), NM24C65(CLIP), NM93C06(CLIP), NM93C46(CLIP), NM93C56(CLIP), NM93C66(CLIP), NM93C86(CLIP), NM93CS06(CLIP), NM93CS46(CLIP), NM93CS56(CLIP),
NM93CS66(CLIP) options in <1-EEPROM&FLASH>-> (Need EEPROM CLIP ADAPTER)
+ Add 24AA02(CLIP), 24AA04(CLIP), 24AA08(CLIP), 24AA16(CLIP), 24AA164(CLIP), 24AA32(CLIP), 24AA128(CLIP), 24AA256(CLIP), 24C02(CLIP), 24C04(CLIP), 24C32(CLIP),
24LC02(CLIP), 24LC04(CLIP), 24LC08(CLIP), 24LC16(CLIP), 24LC164(CLIP), 24LC32(CLIP), 24LC64(CLIP), 24LC65(CLIP), 24LC128(CLIP), 24LC256(CLIP),
93C/LC/AA46A(CLIP), 93C/LC/AA56A(CLIP), 93C/LC/AA66A(CLIP), 93C/LC/AA76A(CLIP), 93C/LC/AA86A(CLIP), 93C/LC/AA46B(CLIP), 93C/LC/AA56B(CLIP), 93C/LC/AA66B(CLIP),
93C/LC/AA76B(CLIP), 93C/LC/AA86B(CLIP), 93C/LC/AA46C(CLIP), 93C/LC/AA56C(CLIP), 93C/LC/AA66C(CLIP), 93C/LC/AA76C(CLIP), 93C/LC/AA86C(CLIP) options in
<1-EEPROM&FLASH>-> (Need EEPROM CLIP ADAPTER)
+ Add M24C01(CLIP), M24C02(CLIP), M24C04(CLIP), M24C08(CLIP), M24C16(CLIP), M24C32(CLIP), M24C64(CLIP), M24C128(CLIP), M24C256(CLIP), M24C512(CLIP),M93C06(CLIP),
M93C46(CLIP), M93C56(CLIP), M93C66(CLIP), M93C76(CLIP), M93C86(CLIP), M95010(CLIP), M95020(CLIP), M95040(CLIP), M95080(CLIP), M95160(CLIP), M95320(CLIP), M95640(CLIP),
M95128(CLIP), M95256(CLIP), M95512(CLIP), ST24C01(CLIP), ST24C02(CLIP), ST24C04(CLIP), ST24C08(CLIP), ST24C16(CLIP), ST24E16(CLIP), ST24E32(CLIP), ST24W02(CLIP),
ST24W04(CLIP), ST24W08(CLIP), ST24W16(CLIP), ST25C01(CLIP), ST25C02(CLIP), ST25C04(CLIP), ST25C08(CLIP), ST25C16(CLIP), ST25E16(CLIP), ST25E32(CLIP), ST93CS56(CLIP),
ST93CS57(CLIP), ST93CS66(CLIP), ST93CS67(CLIP), ST93CS47(CLIP), ST93CS46(CLIP) options in <1-EEPROM&FLASH>-> (Need EEPROM CLIP ADAPTER)
+ Add X24C01(CLIP), X5043(CLIP), X5045(CLIP) options in <1-EEPROM&FLASH>->(Need EEPROM CLIP ADAPTER)
+ Add ME7.4.5-FLASH-ST10F275, ME7.4.5-EEPROM-95320 options in <3-ECU>->
+ Add BCM2(D70F3380) option in <4-IMMOBILIZER>->
+ Add EWS3-KLINE(0D46J) option in <4-IMMOBILIZER>-> (Need EWS3 ADAPTER)
+ Add BCM-XEP100(2009--) option in <4-IMMOBILIZER>->
+ Add LAGUNA-UCT(2006) option in <4-IMMOBILIZER>->
+ Add BCM2(D70F3380) option in <4-IMMOBILIZER>->
+ Add BJ40-DASHBORAD, E150-DASHBORAD(2014), EX200-BCM(2016) options in <5-DASHBORAD>->
+ Add EQ-DASHBOARD(2017) option in <5-DASHBORAD>->

VVDI PROG latest software version V4.6.0 update((2017-07-26)
* This version DON't need update firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.6.0 version in Doc folder
* Change some RENESAS-V850 chips DFLASH size to 64KB
* Fix GM-BCM3 option
* Fix V850E2 series diagrams
* Change KESSY(2008--) diagram
+ Add V850E-SK3H,V850-SJ3H series diagrams
+ Add NM93CS06, NM93CS46, NM93CS56, NM93CS66, FM93CS06, FM93CS46,FM93CS56,
FM93CS66 options in <1-EEPROM&FLASH>->
+ Add M93S06, M93S46, M93S56, M93S66, ST93CS46, ST93CS47, ST93CS56, ST93CS57,
ST93CS66, ST93CS67 options in <1-EEPROM&FLASH>->
+ Add D80(ADAPTER), D160(ADAPTER), M350803(ADAPTER), M350806(ADAPTER), M35080V6(ADAPTER),
M35080VP(ADAPTER) options in <1-EEPROM&FLASH>->(Need M35080/D80 ADAPTER)
+ Add MC9S12HN64_UNSECURED, MC9S12HZ64_UNSECURED, MC9S12HN64_SECURED,
MC9S12HZ64_SECURED options in <2-MCU>->
+ Add ST72321(R/AR)6, ST72F321(R/AR)6, ST72321(R/AR/J)7, ST72F321(R/AR/J)7, ST72321(R/AR/J)9,
ST72F321(R/AR/J)9, ST72521B(R/AR)6, ST72F521(R/AR)6, ST72521B(M/R/AR)9, ST72F521(M/R/AR)9 options
in <2-MCU>->
+ Add SPC5606S option in <2-MCU>->
+ Add ME7.5.20(ST10F275) option in <3-ECU>->
+ Add KESSY(2008--) option in <4-IMMOBILIZER>->
+ Add KEYLESS-ENTRY-MODULE(2009--)option in <4-IMMOBILIZER>->
+ Add HAVAL-H9-BCM(D70F3632) option in <4-IMMOBILIZER>->
+ Add BCM(2009--) option in <4-IMMOBILIZER>->
+ Add XINBAO(MC9S08LG16) option in <5-DASHBORAD>->
+ Add CRUZE(D70F3423) option in <5-DASHBORAD>->
+ Add DASHBORAD(2013--)(SPC5604S), DASHBORAD(2013--)(SPC5606S), FIESTA(3L16Y),
FOCUS-C-MAX(2009) options in <5-DASHBORAD>->
+ Add BESTURN-B70-SRS(D70F3623) option in <7-ARIBAG>->
+ Add ACCORD-SRS(SPC56AP54L3) option in <7-ARIBAG>->
+ Add SRS-VW20(SPC560P50L3) option in <7-ARIBAG>->
+ Add A4L-LEW-MODULE(2013) option in <8-OTHER>->
+ Add EVOQUE-EPB-MODULE(2013) option in <8-OTHER>->

VVDI PROG 4.5.9 Newly Update(2017-06-28)

* This version DON't need update firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.5.9 version in Doc folder
* Update polish language
+ Update V850 D-Flash format conversion tool
* Fix STM8 series options error
* Fix MED17.1 option error
* Fix V850E-DG3 diagram error
* Fix ME17.9.11.1 diagram error
* Fix BAOJUN630 diagram error
+ Add MPC5606B, MPC5607B, MPC5602D, MPC5606E, MPC5601P, MPC5602S, MPC5604S options
in <2-MCU>->
+ Add SPC560B50B2, SPC560B64L3, SPC560C40L1, SPC560C50L1, SPC56AP54L3, SPC56AP54L5,
SPC56AP60L3, SPC56AP60L5 options in <2-MCU>->
+ Add MT60(TC1766) option in <3-ECU>->
+ Add V3 diagram in <3-ECU>->->
+ Add KESSY(2008--) option in <4-IMMOBILIZER>->
(Need to use with VVDI2,support Touareg, Bentley, A8, Cayenne, Phaeton with kessy module (IMMO4 system) after 2008)
+ Add XC60-REVIEW-MIRROR option in <4-IMMOBILIZER>->
+ Add SENOVA-D70 option in <5-DASHBORAD>->
+ Add EXCELLEGT option in <5-DASHBORAD>->
+ Add AVEO option in <5-DASHBORAD>->
+ Add FIESTA option in <5-DASHBORAD>->
+ Add K5(2017) option in <5-DASHBORAD>->
+ Add FREELANDER(2004) option in <5-DASHBORAD>->
+ Add MG3(2016) option in <5-DASHBORAD>->
+ Add EXCELLEGT-SRS option in <7-ARIBAG>->
+ Add ALSVIN-SRS option in <7-ARIBAG>->
+ Add CITY-SRS(MPC5604P) option in <7-ARIBAG>->
+ Add 2008-SRS option in <7-ARIBAG>->
+ Add SRS-VW20LE(SPC560P50L3) option in <7-ARIBAG>->
+ Add A4L-LWR-MODULE(2010), A6L-C6-AMP, A8L-AMB-MODULE(2011), ESL-HC08GR16-V2 options in <8-OTHER>->
+ Add 528-SEAT-MODULE option in <8-OTHER>->

VVDI Prog v4.5.7 Newly Update (2017-04-21)
* This version DON't need update firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.5.7
version in Doc folder
* Fix some MC68HC(9)08 read error
problem
* Fix PIC12F(16F) diagram error
problem
+ Add TC1762-CAN,
TC1766-CAN options
in <2-MCU>->
+ Add STM8AF5179,
STM8AF5268, STM8AF5269, STM8AF5286, STM8AF5288, STM8AF5289,
STM8AF528A, STM8AF52A6, STM8AF52A8, STM8AF52A9, STM8AF52AA,
STM8AF6168, STM8AF6213, STM8AF6223, STM8AF6223A, STM8AF6246,
STM8AF6248, STM8AF6266, STM8AF6268, STM8AF6269, STM8AF6286,
STM8AF6288, STM8AF6289, STM8AF628A, STM8AF62A6, STM8AF62A8,
STM8AF62A9, STM8AF62AA, STM8AL3136, STM8AL3138, STM8AL3146,
STM8AL3148, STM8AL3166, STM8AL3168, STM8AL3188, STM8AL3189,
STM8AL318A, STM8AL31E88, STM8AL31E89, STM8AL31E8A,
STM8AL3LE88, STM8AL3LE89, STM8AL3LE8A, STM8AL3L46,
STM8AL3L48, STM8AL3L66, STM8AL3L68, STM8AL3L88,
STM8AL3L89, STM8AL3L8A, STM8L051F3, STM8L052C6,
STM8L052R8, STM8L101F1, STM8L101F2, STM8L101F3,
STM8L101G2, STM8L101G3, STM8L101K3, STM8L151C2,
STM8L151C3, STM8L151C4, STM8L151C6, STM8L151C8,
STM8L151F2, STM8L151F3, STM8L151G2, STM8L151G3,
STM8L151G4, STM8L151G6, STM8L151K2, STM8L151K3,
STM8L151K4, STM8L151K6, STM8L151M8, STM8L151R6,
STM8L151R8, STM8L152C4, STM8L152C6, STM8L152C8,
STM8L152K4, STM8L152K6, STM8L152K8, STM8L152M8,
STM8L152R6, STM8L152R8, STM8L162R8, STM8L162M8,
STM8S003F3, STM8S003K3, STM8S003C6, STM8S003K6,
STM8S007C8, STM8S103F2, STM8S103F3, STM8S103K3,
STM8L105C4, STM8L105C6, STM8L105K4, STM8L105K6,
STM8L105S4, STM8L105S6, STM8S207C6, STM8S207CB,
STM8S207K6, STM8S207K8, STM8S207M8, STM8S207MB,
STM8S207R6, STM8S207R8, STM8S207RB, STM8S207S6,
STM8S207S8, STM8S208C6, STM8S208C8, STM8S208MB,
STM8S208R8, STM8S208RB, STM8S903F, STM8S903K options
in <2-MCU>->
+ Add ME17.9.11.1(TC1762) option
in <3-ECU>->
+ Add MED17.1(TC1766) option
in <3-ECU>->
+ Add EIS-W639(1J35D),
EIS-W639(3K85K),
EIS-W639(4J74Y) options
in <4-IMMOBILIZER>->
+ Add JIEFANG-J6-HCS300 option
in <4-IMMOBILIZER>->
* Change JIEFANG-J6-BCM option
(Support up to 5 remotes)
+ Add SENOVA-D60 option
in <5-DASHBORAD>->
+ Add EADO option
in <5-DASHBORAD>->
+ Add TRUMPCHI-GS4 option
in <5-DASHBORAD>->

VVDI PROG V4.5.6 Newly Update (2017-03-21) 
*This version don't need update firmware:
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.5.6
version in Doc folder
+ Support operate software while
opening the diagram
* Fix MC9S12G192,
MC9S12GA19,
MC9S12G240,
MC9S12GA240 options
PFLASH write error problem
+ Add PIC12F635,
PIC12F683 options
in <2-MCU>->

+ Add PIC16F631,
PIC16F636,
PIC16F639,
PIC16F677,
PIC16F684,
PIC16F685,
PIC16F687,
PIC16F688,
PIC16F689,
PIC16F690 options
in <2-MCU>->

+ Add JIEFANG-J6-BCM option
in <4-IMMOBILIZER>->
(Need to use with VVDI2)
+ Add FC-OPERATION-UNIT-W221
option in <8-OTHER>->

VVDI PROG Latest Software Version V4.5.2 Update  (2016-11-25)
* This version DON't need update
  firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.5.1
  version in Doc folder
+ Add AB28F200B5T(PSOP44),
  AB28F200B5B(PSOP44),
  AB28F400B5T(PSOP44),
  AB28F400B5B(PSOP44),
  AB28F800B5T(PSOP44),
  AB28F800B5B(PSOP44)options
  in <1-EEPROM&FLASH>->
  (Need the TB28FXXX adapter)
+ Add HC908GR4,
  HC908GR8,
  HC908LJ12,
  HC908LJ24, 
  HC908GR4_SECURED,
  HC908GR8_SECURED,
  HC908LJ12_SECURED,
  HC908LJ24_SECURED options 
  in <2-MCU>->

+ Add MC9S08JM8_UNSECURED,
  MC9S08JM16_UNSECURED,
  MC9S08JM32_UNSECURED,
  MC9S08JM60_UNSECURED options
  in <2-MCU>-> 
+ Add [V850ES/FE3]series:
  D70F3623 option
  [V850ES/FF3]series:
  D70F3626 option
  [V850ES/FG3]series:
  D70F3627,
  D70F3629,
  D70F3630 options
  [V850ES/FJ3]series:
  D70F3631,
  D70F3632,
  D70F3633,
  D70F3634,
  D70F3635 options
  [V850ES/FK3]series:
  D70F3636,
  D70F3637,
  D70F3638 options
  in <2-MCU>->

+ Add BCM3 option
  in <4-IMMOBILIZER>->   
+ Add XIAOKANG(2015) option
  in <5-DASHBORAD>-> 
+ Add SAICMAXUS-RV(2015) option
  in <5-DASHBORAD>->   
+ Add <7-ARIBAG> option in TYPE 
+ Add GL8-SRS(2015) option
  in <7-ARIBAG>->
+ Add MAKKA-SRS(2015) option
  in <7-ARIBAG>->
+ Add VW52-SRS-V2 option
  in <7-ARIBAG>->

VVDI PROG Latest Software Version V4.5.1 Update (2016-10-24)
* This version DON't need update
  firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.5.1
  version in Doc folder
* Fix MC68HC908 series write FLASH
  problem 
+ Add MB91F037,
  MB91F061,
  MB91F062 options
  in <2-MCU>->
  
+ Add [V850E2/DK4]series:
  D70F3529 option
  [V850E2/FG4]series:
  D70F3548,
  D70F3549,
  D70F3550,
  D70F4000,
  D70F4001,
  D70F4002 options
  [V850E2/FJ4]series:
  D70F3551,
  D70F3552,
  D70F3553,
  D70F3554,
  D70F4003,
  D70F4004,
  D70F4005,
  D70F4006 options
  [V850E2/FK4]series:
  D70F3555,
  D70F3556,
  D70F3557,
  D70F3558,
  D70F3592,
  D70F4007,
  D70F4008,
  D70F4009,
  D70F4010 options
  [V850E2/FL4]series:
  D70F3559,
  D70F3560,
  D70F4011,
  D70F4012 options
  [V850E2/FK4-H]series: 
  D70F3561 options
  [V850E2/FL4-H]series: 
  D70F3564 options 
  [V850E2/FE4-L]series:
  D70F3570,
  D70F3571,
  D70F3572 options
  [V850E2/FF4-L]series:
  D70F3573,
  D70F3574,
  D70F3575 options
  [V850E2/FG4-L]series: 
  D70F3576,
  D70F3577,
  D70F3578,
  D70F3579,
  D70F3580 options
  [V850E2/FJ4-L]series: 
  D70F3582,
  D70F3583,
  D70F3584,
  D70F3585 options 
  in <2-MCU>->

+ Add DISCOVER3-CEM,
  RANGE-ROVER-SPORT-CEM options
  in <4-IMMOBILIZER>->  
+ Add BIG7-ICU(HC908GZ32) option
  in <4-IMMOBILIZER>->  
+ Add SRS(2016) option
  in <8-OTHER>->


VVDI PROG Latest Software Version V4.5.0 Update  (2016-09-26)
* This version DON't need update firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.5.0 version in Doc folder
* Fix ATMEGAxx8 diagram error problem
* Change D70f3624 diagram(add QFP64 package)
+ Add ATMEGA48P,ATMEGA48PB, ATMEGA88P,ATMEGA88PB, ATMEGA163,ATMEGA164,
ATMEGA164P, ATMEGA168P,ATMEGA168PB, ATMEGA169P,ATMEGA323,ATMEGA324, ATMEGA324P,
ATMEGA324PB, ATMEGA325, ATMEGA325P, ATMEGA3250, ATMEGA3250P, ATMEGA328, ATMEGA328P,
ATMEGA328PB, ATMEGA329, ATMEGA329P,ATMEGA3290, ATMEGA3290P,ATMEGA644, ATMEGA644P,
ATMEGA645, ATMEGA645P, ATMEGA6450, ATMEGA6450P, ATMEGA649, ATMEGA649P, ATMEGA6490,
ATMEGA6490P, ATMEGA103, ATMEGA1284, ATMEGA1284P optionsin <2-MCU>->
+ Add HC908GZ8,HC908GZ16, HC908GZ32,HC908GZ48,HC908GZ60,HC908GZ8_SECURED,HC9 08GZ16_SECURED,
HC908GZ32_SECURED,HC908GZ48_SECURED,HC908GZ60_SECU RED options in <2-MCU>->
+ Add MC912DT128_UNSECURED,MC912DT128A_UNSECURED,MC912DT 128P_UNSECURED,MC912DT128_SECURED,
MC912DT128A_SECURED,MC912DT128P_SECURED optionsin <2-MCU>->
+ Add MT20U2-MC912DT128P option in <3-ECU>->
+ Add BESTURN-B90-BCM option in <4-IMMOBILIZER>->
+ Add FENGGUANG(2016) option in <5-DASHBORAD>->
+ Add XC60-HIGH-EQUIPPED(2014) option in <5-DASHBORAD>->

VVDI Prog V4.4.8(2016-08-01) Newly Update
* This version DON't need update
  firmware
* Fix some bugs
  (write or erase operation prompt
  device error problem)

VVDI Prog V4.4.6(2016-06-23) Newly Update
* This version DON't need update
  firmware
* Fix some bugs 
* Fix Chrysler 300C IMMO diagram
  error
+ Add VVDI PROG USER MUNUAL 4.4.6
  version in Doc folder
+ Add MC68HC(9)08_MASK_ID.cfg file
  in software folder,list the
  corresponding MC68HC(9)08 seires
  chip type of MASK ID
+ Add HC08AB16A_EEP,
  HC08AS20_EEP,
  HC08AS32_EEP,
  HC08AS32A_EEP,
  HC08AZ0_EEP,
  HC08AZ16_EEP,
  HC08AZ24_EEP,
  HC08AZ32_EEP,
  HC08AZ32A_EEP,
  HC08AZ48_EEP,
  HC08AZ48A_EEP,
  HC08AZ60_EEP,
  HC08AZ60_EEP(1J35D),
  HC08AZ60A_EEP,
  HC908AB32_EEP,
  HC908AS32A_EEP,
  HC908AS60_EEP,
  HC908AS60A_EEP,
  HC908AZ32A_EEP,
  HC908AZ60_EEP,
  HC908AZ60_EEP(4J74Y),
  HC908AZ60A_EEP,
  HC908AZ60E_EEP,
  HC08AS20_EEP_SECURED,
  HC08AS32_EEP_SECURED,
  HC08AS32A_EEP_SECURED,
  HC08AZ0_EEP_SECURED,
  HC08AZ16_EEP_SECURED,
  HC08AZ24_EEP_SECURED,
  HC08AZ32_EEP_SECURED,
  HC08AZ32A_EEP_SECURED,
  HC08AZ48_EEP_SECURED,
  HC08AZ48A_EEP_SECURED,
  HC08AZ60_EEP_SECURED,
  HC08AZ60A_EEP_SECURED,
  HC908AB32_EEP_SECURED,
  HC908AS32A_EEP_SECURED,
  HC908AS60_EEP_SECURED,
  HC908AS60A_EEP_SECURED,
  HC908AZ32A_EEP_SECURED,
  HC908AZ60_EEP_SECURED,
  HC908AZ60A_EEP_SECURED,
  HC908AZ60E_EEP_SECURED options
  in <2-MCU>->
    
+ Add MC9S08GW32_UNSECURED,
  MC9S08GW64_UNSECURED,
  MC9S08JE64_UNSECURED,
  MC9S08JE128_UNSECURED,
  MC9S08LC36_UNSECURED,
  MC9S08LC60_UNSECURED,
  MC9S08LH36_UNSECURED,
  MC9S08LH64_UNSECURED,
  MC9S08LL8_UNSECURED,
  MC9S08LL16_UNSECURED,
  MC9S08LL36_UNSECURED,
  MC9S08LL64_UNSECURED,
  MC9S08MM32_UNSECURED,
  MC9S08MM32A_UNSECURED,
  MC9S08MM64_UNSECURED,
  MC9S08MM128_UNSECURED,
  MC9S08QB4_UNSECURED,
  MC9S08QB8_UNSECURED,
  MC9S08QE4_UNSECURED,
  MC9S08QE8_UNSECURED,
  MC9S08QE16_UNSECURED,
  MC9S08QE32_UNSECURED,
  MC9S08QE64_UNSECURED,
  MC9S08QE96_UNSECURED,
  MC9S08QE128_UNSECURED,
  MC9S08RC8_UNSECURED,
  MC9S08RC16_UNSECURED,
  MC9S08RC32_UNSECURED,
  MC9S08RC60_UNSECURED,
  MC9S08RC8_UNSECURED,
  MC9S08RC16_UNSECURED,
  MC9S08RC32_UNSECURED,
  MC9S08RC60_UNSECURED,
  MC9S08RD8_UNSECURED,
  MC9S08RD16_UNSECURED,
  MC9S08RD32_UNSECURED,
  MC9S08RD60_UNSECURED,
  MC9S08RE8_UNSECURED,
  MC9S08RE16_UNSECURED,
  MC9S08RE32_UNSECURED,
  MC9S08RE60_UNSECURED,
  MC9S08RG32_UNSECURED,
  MC9S08RG60_UNSECURED options
  in <2-MCU>->
+ Add EIS-W203(1J35D),
  EIS-W203(1J74Y),
  EIS-W203(2J74Y),
  EIS-W203(3J74Y),
  EIS-W203(4J74Y),
  EIS-W220(W215)(1J35D),
  EIS-W220(W215)(1J74Y),
  EIS-W220(W215)(2J74Y),
  EIS-W220(W215)(3J74Y),
  EIS-W220(W215)(4J74Y),
  EIS-W639(0L02M),
  EIS-W639(1L02M),
  EIZ-W203(HC12),
  EIZ-W209(HC12),
  EIZ-W211(HC12),
  EIZ-W219(HC12),
  EIZ-W220(HC12),
  EIZ-W230(HC12),
  EIZ-W169(ST12) options
  in <4-IMMOBILIZER>->
+ Add RANGE-ROVER-EWS(2004-08) option
  in <4-IMMOBILIZER>-> 
+ Add VECTRA(2004-08) option
  in <4-IMMOBILIZER>-> 
+ Add ARRIZO7,
  ARRIZO-M7 options
  in <5-DASHBORAD>->   
+ Add CHANGAN-STAR-9,
  CS75(2014),
  RUIXING options
  in <5-DASHBORAD>-> 
+ Add MONDEO(2004-07) option
  in <5-DASHBORAD>->  
+ Add YINGLUN(2012) option
  in <5-DASHBORAD>->
+ Add HONDA(2014-) option
  in <5-DASHBORAD>-> 

VVDI Prog  V4.4.5 (2016-05-25) Newly Update
* This version DON't need update
  firmware
* Fix some bugs
* Fix MC9S12XE seires write
  P-FLASH bug
  (write BMW FRM bug)
+ Add VVDI PROG USER MUNUAL in
  Doc folder
+ Add 12V power output status in
  software
+ Add MC9S08LG16_UNSECURED,
  MC9S08LG32_UNSECURED,
  MC9S08MP12_UNSECURED,
  MC9S08MP16_UNSECURED,
  MC9S08SC4_UNSECURED,
  MC9S08SG4_UNSECURED,
  MC9S08SG8_UNSECURED,
  MC9S08SG16_UNSECURED,
  MC9S08SG32_UNSECURED,
  MC9S08SF4_UNSECURED,
  MC9S08SV8_UNSECURED,
  MC9S08SV16_UNSECURED options
  in <2-MCU>->
+ Add MC68HC12BC32_UNSECURED,
  MC68HC12BE32_UNSECURED,
  MC68HC912B32_UNSECURED,
  MC68HC912BC32_UNSECURED,
  MC68HC912BD32_UNSECURED,
  MC912D60_UNSECURED,
  MC912D60A_UNSECURED,
  MC912DG128_UNSECURED,
  MC912DG128A_UNSECURED,
  MC68HC912BD32_SECURED,
  MC912D60_SECURED,
  MC912D60A_SECURED,
  MC912DG128_SECURED,
  MC912DG128A_SECURED options
  in <2-MCU>->

+ Add MC9S12H128_UNSECURED,
  MC9S12H256_UNSECURED,
  MC9S12H128_SECURED,
  MC9S12H256_SECURED options
  Mask:(0K78X,1K78X)
  MC9S12XF128_UNSECURED,
  MC9S12XF256_UNSECURED, 
  MC9S12XF384_UNSECURED,
  MC9S12XF512_UNSECURED,
  MC9S12XF128_SECURED,
  MC9S12XF256_SECURED, 
  MC9S12XF384_SECURED,
  MC9S12XF512_SECURED options
  Mask:(0M64J,1M64J,2M64J)
  in <2-MCU>->
+ Add R5F2154XX-RESET-SEC,
  R5F21546E,
  R5F21547E,
  R5F21548E,
  R5F2154AE,
  R5F2154CE,
  R5F21546F,
  R5F21547F,
  R5F21548F,
  R5F2154AF,
  R5F2154CF,
  R5F21546G,
  R5F21547G,
  R5F21548G,
  R5F2154AG,
  R5F2154CG,
  R5F21546H,
  R5F21547H,
  R5F21548H,
  R5F2154AH,
  R5F2154CH options
  in <2-MCU>->
+ Add D70F3416,
  D70F3417,
  D70F3421,
  D70F3422,
  D70F3423,
  D70F3424,
  D70F3425,
  D70F3426,
  D70F3427,
  D70F3433,
  D70F3610,
  D70F3611,
  D70F3612,
  D70F3613,
  D70F3614,
  D70F3615,
  D70F3616,
  D70F3617,
  D70F3618,
  D70F3619,
  D70F3620,
  D70F3621,
  D70F3622,
  D70F3624,
  D70F3628,
  D70F3634 options
  in <2-MCU>->
+ Add BCM2(D70F3379),
  BCM2(D70F3381/3634) options
  in <4-IMMOBILIZER>->
+ Add BCM2(D70F3379),
  BCM2(D70F3381/3634) options
  in <4-IMMOBILIZER>->
+ Add EXCELLE(2010),
  EXCELLE(2013-15),
  GL8-FIRSTLAND(2007),
  LACROSSE(2008) options
  in <5-DASHBORAD>->
+ Add YUEXIANG(2014) option
  in <5-DASHBORAD>->    
+ Add FOCUS(2005),
  MONDEO-CHIA-X(2009),
  S-MAX(2008) options
  in <5-DASHBORAD>-> 
+ Add LOBO(2008) option
  in <5-DASHBORAD>->  
+ Add FAMILY(2011-13) option
  in <5-DASHBORAD>->  
+ Add S-SEIRES option
  in <5-DASHBORAD>->  
+ Add JINBEI(2015) option
  in <5-DASHBORAD>->  
+ Add LANDWIND-X8 option
  in <5-DASHBORAD>->  
+ Add XC60(2016) option
  in <5-DASHBORAD>->
+ Add FSV(2010-) option
  in <5-DASHBORAD>->
+ Add SR7 option
  in <5-DASHBORAD>->

VVDI Prog V4.4.4(2016-04-25) Newly Update
* VVDI PROG v4.4.4 doesn’t need firmware update
* Fix some bugs
* Change some prompt information
* Fix some errors when writing some MC9S12 series EEPROMs
+ Add update information when the new software is being update
+ Add the Frequency button in MC9S12 seires UNSECURED version;
  support manually set frequency, search the right frequency from
  MC9S12_BADURATE.cfg in the data folder and also support adding the frequency parameter
+ Add Frequency button in RENESAS-V850 series:
  Support manually set frequency, search the right frequency from
  V850_BADURATE.cfg in the data folder and also support adding the frequency parameter
+ Add Frequency button in RENESAS-R5F61XXX series:
Support manually set frequency, search the right frequency from
  R5F61XXX_BADURATE.cfg in the data folder and also support adding the frequency parameter
+ Add the following options in <2-MCU>->
  MC9S08AC8_UNSECURED,
  MC9S08AC16_UNSECURED,
  MC9S08AC32_UNSECURED,
  MC9S08AC48_UNSECURED,
  MC9S08AC60_UNSECURED,
  MC9S08AC96_UNSECURED,
  MC9S08AC128_UNSECURED,
  MC9S08AW8_UNSECURED,
  MC9S08AW16_UNSECURED,
  MC9S08AW32_UNSECURED,
  MC9S08AW48_UNSECURED,
  MC9S08AW60_UNSECURED,
  MC9S08DV16_UNSECURED,
  MC9S08DV32_UNSECURED,
  MC9S08DV48_UNSECURED,
  MC9S08DV60_UNSECURED,
  MC9S08DV96_UNSECURED,
  MC9S08DV128_UNSECURED,
  MC9S08DZ16_UNSECURED,
  MC9S08DZ32_UNSECURED,
  MC9S08DZ48_UNSECURED,
  MC9S08DZ60_UNSECURED,
  MC9S08DZ96_UNSECURED,
  MC9S08DZ128_UNSECURED,
  MC9S08EL16_UNSECURED,
  MC9S08EL32_UNSECURED,
  MC9S08FL8_UNSECURED,
  MC9S08FL16_UNSECURED,
  MC9S08GB32_UNSECURED,
  MC9S08GB60_UNSECURED,
  MC9S08GT16_UNSECURED,
  MC9S08GT32_UNSECURED,
  MC9S08GT60_UNSECURED,
  MC9S08JS8_UNSECURED,
  MC9S08JS16_UNSECURED,
  MC9S08QA2_UNSECURED,
  MC9S08QA4_UNSECURED,
  MC9S08QD2_UNSECURED,
  MC9S08QD4_UNSECURED,
  MC9S08QG4_UNSECURED,
  MC9S08QG8_UNSECURED,
  MC9S08SE4_UNSECURED,
  MC9S08SE8_UNSECURED, 
  MC9S08SH4_UNSECURED,
  MC9S08SH8_UNSECURED, 
  MC9S08SL8_UNSECURED,
  MC9S08SL16_UNSECURED
+ Add R5F61723 in <2-MCU>-> 
+ Add QUADROCYCLE(2011) in <3-ECU>->
+ Add H2-BCM in <4-IMMOBILIZER>->
+ Add Changan BENBEN,S35,JINNIUXING,YUEXIANG in <5-DASHBORAD>->
+ Add CAPTIVA(2008) in <5-DASHBORAD>->
+ Add VENUCIA-R50(2014),XIAOKANG(2014) in <5-DASHBORAD>->
+ Add BESTURN-B50,BESTURN-B90(2014),BESTURN-X80(2013),
  VITA(2008) in <5-DASHBORAD>-> 
+ Add FOCUS(09-10) in <5-DASHBORAD>-> 
+ Add C30(2010) in <5-DASHBORAD>-> 
+ Add S5 in <5-DASHBORAD>-> 
+ Add LUXGEN in <5-DASHBORAD>->     
+ Add QASHQAI(2011) in <5-DASHBORAD>->     
+ Add BAOJUN730(2015), ROEWE550,SGMW-WULINGZHIGUANG in <5-DASHBORAD>->     
+ Add S40(2006-08), S40(2010), XC60(2012) in <5-DASHBORAD>-> 
+ Add V5 in <5-DASHBORAD>->         
+ Add Z300(2013) in <5-DASHBORAD>->   
+ Add ISM-W221,LU-W221,SAM-W221 in <7-OTHER>->   
+ Add RFA in <7-OTHER>->   
+ Add PASSAT-B6-PBCM in <7-OTHER>->

VVDI Prog V4.4.3(2016-03-31) Newly Update
* This version DON't need update
  firmware
+ Add R5F61725 option
  in <2-MCU>->
+ Add MC9S12HZ128_UNSECURED,
  MC9S12HZ256_UNSECURED,
  MC9S12KG128_UNSECURED,
  MC9S12KG256_UNSECURED,
  MC9S12KT128_UNSECURED,
  MC9S12KT256_UNSECURED,
  MC9S12XEA128_UNSECURED,
  MC9S12XEG128_UNSECURED,
  MC9S12XEA256_UNSECURED,
  MC9S12XEG256_UNSECURED,
  MC9S12XET256_UNSECURED,
  MC9S12XEG384_UNSECURED,
  MC9S12XEQ384_UNSECURED,
  MC9S12XES384_UNSECURED,
  MC9S12XEQ512_UNSECURED,
  MC9S12XET512_UNSECURED,
  MC9S12XEP768_UNSECURED,
  MC9S12XEP100_UNSECURED,
  MC9S12XHZ256_UNSECURED,
  MC9S12XHZ384_UNSECURED,
  MC9S12XHZ512_UNSECURED,
  MC9S12HZ128_SECURED,
  MC9S12HZ256_SECURED, 
  MC9S12KG128_SECURED, 
  MC9S12KG256_SECURED, 
  MC9S12KT128_SECURED, 
  MC9S12KT256_SECURED, 
  MC9S12XEA128_SECURED,
  MC9S12XEG128_SECURED,
  MC9S12XEA256_SECURED,
  MC9S12XEG256_SECURED,
  MC9S12XET256_SECURED,
  MC9S12XEG384_SECURED,
  MC9S12XEQ384_SECURED,
  MC9S12XES384_SECURED,
  MC9S12XEQ512_SECURED,
  MC9S12XET512_SECURED,
  MC9S12XEP768_SECURED,
  MC9S12XEP100_SECURED,
  MC9S12XHZ256_SECURED,
  MC9S12XHZ384_SECURED,
  MC9S12XHZ512_SECURED diagram
  in <2-MCU>-> 
+ Add SGMW-HONGGUANG option
  in <5-DASHBORAD>->
+ Add 315M-IN-CIRCUIT,
  315M-CHIP,
  434M-IN-CIRCUIT,
  434M-CHIP, 
  868M-IN-CIRCUIT,
  868M-CHIP options in
  <6-REMOTE>-> 

VVDIProg4.4.0.zip  v4.4.0(2016-03-07) Newly Update
* This version DON't need update
  firmware
* Add the Download Link in Upgrade
  option, click it and get the last
  version software!!!
* Change the diagram interface
+ Add MC9S12C32_SECURED,
  MC9S12C64_SECURED,
  MC9S12C96_SECURED,
  MC9S12C128_SECURED
  in <2-MCU>->
  Mask:(0M66G,1M34C,1L45J,2L45J)
+ Add EIZ-W164(ST12),
  EIZ-W215(ST12),
  EIZ-W221(ST12),
  EIZ-VANEO(ST12) options
  in <4-IMMOBILIZER>->
+ Add CAPTIVA(2011) option in
  <5-DASHBORAD>->
+ Add BAOJUN330 option in
  <5-DASHBORAD>->
+ Add C70(2011) option in
  <5-DASHBORAD>->

VVDIProg v4.3.1(2016-01-27) Newly Update

* This version DON't need update
  firmware
+ Add MC9S12GN16_UNSECURED,
  MC9S12GNA16_UNSECURED,
  MC9S12GN32_UNSECURED,
  MC9S12GNA32_UNSECURED,
  MC9S12G48_UNSECURED,
  MC9S12GA48_UNSECURED,
  MC9S12GN48_UNSECURED,
  MC9S12G64_UNSECURED,
  MC9S12GA64_UNSECURED,
  MC9S12G96_UNSECURED,
  MC9S12GA96_UNSECURED,
  MC9S12G128_UNSECURED,
  MC9S12GA128_UNSECURED,
  MC9S12G192_UNSECURED,
  MC9S12GA192_UNSECURED,
  MC9S12G240_UNSECURED,
  MC9S12GA240_UNSECURED options
  Mask:(0N95B,0N51A,0N75C,1N75C,
  0N48A,1N48A)
  MC9S12HA32_UNSECURED,
  MC9S12HA48_UNSECURED,
  MC9S12HA64_UNSECURED,
  MC9S12HY32_UNSECURED,
  MC9S12HY48_UNSECURED,
  MC9S12HY64_UNSECURED options
  Mask:(0M34S)
  MC9S12P32_UNSECURED,
  MC9S12P64_UNSECURED,
  MC9S12P96_UNSECURED,
  MC9S12P128_UNSECURED options
  Mask:(0M01N)
  MC9S12XEA128_UNSECURED,
  MC9S12XEG128_UNSECURED,
  MC9S12XEA128_SECURED,
  MC9S12XEG128_SECURED options
  Mask:(1M53J,2M53J,0N36H,1N36H)
  MC9S12XHY128_UNSECURED,
  MC9S12XHY256_UNSECURED options
  Mask:(0M23Y)
  MC9S12XS64_UNSECURED,
  MC9S12XS128_UNSECURED,
  MC9S12XS256_UNSECURED options
  Mask:(0M04M,1M04M,0M05M)
  in <2-MCU>->
+ Add MC9S12XE_UNLOCK option
  in <2-MCU>->
  (Backup all data before use it)
+ Add ME20U2-XET256-BACKUP,
  ME20U2-XET512-BACKUP,
  MT22-XEP768-BACKUP,