JIA XUN MS9311 Automotive Circuit Tester JIAXUN MS9311 Automotive Car Open Circuit Detector detect various line faults without damaging the rubber

JIA XUN MS9311 Automotive Circuit Tester is Jiaxun Third Generation MS9311 Car Multimeter tester Features Can Measure Current. JIAXUN MS9311 Automotive Car Open Circuit Detector with hook puncture needle. OBD2Store.com JIA XUN MS9311 Automotive Circuit Tester JIAXUN MS9311 Automotive Car Open Circuit Detector detect various line faults without damaging the rubber. 

JIA XUN MS9311 Automotive Car Open Circuit Detector Jiaxun Third Generation MS9311 Car Multimeter tester Features Can Measure Current

OBD2Store.com JIA XUN MS9311 Automotive Car Open Circuit Detector Function:

It can accurately detect fault locations in automotive circuits.

By setting multiple gears, it is suitable for different fault detection.

Very suitable for auto repair shops, 4s thieves, DIY enthusiasts.

1. It can accurately detect various line faults without damaging the rubber.

2. Set up a multimeter and test the ramp device with functions that the top multimeter does not have. Especially the detection of poor contact wires and aging wires.

3. Every defect can be detected in a small space and low light.

* This product is only a four-in-one product with multimeter, test lamp, lighting lamp and probe functions.

* All functions of the digital multimeter are intelligent. The backlight turns off automatically after 30 seconds. All ranges are smart, and the device will automatically turn off after 20 minutes of inactivity.

* Easy to use, high detection efficiency, simple operation and reliable performance.

JIAXun MS9311 Automotive Electrical Tester Multimeter from obd2store.com Voltage measuring device:

1. Ground the alligator clip of the black test pen, turn the knob switch to the voltage measurement position, use a feeler gauge to connect the sensed rubber cover wire and press the trigger. Place the probe against the front sensor rubber cover wire. If the wire is powered, the LCD will naturally display the correct voltage on the wire. (Can measure 0V-60V DC voltage).

2. Press the function switch key (select), the LCD displays the AC symbol (AC), and measure the 0V-380V AC voltage.

For car electrical decoration, you need to look for a lot of control wires or signal wires. If you use ordinary tools (multimeter or test lamp), the rubber sleeve is damaged when searching, and it is easy to injure your hands.

This tool can accurately detect the control or signal line you need, as long as you connect the detected line and press the trigger, the rubber sleeve will not be damaged. Convenient and efficient.

OBD2Store.com JIA XUN MS9311 Automotive Car Open Circuit Detector Specification

Test light: DC 0V-30V

Maximum display: 1999

LED light DC: 0v-60v

Measuring range: automatic

Hooks: all tests

Polarity indication: automatic

DC voltage: 199.9mv 1.999v, 19.99v, 199.9v, 1000v

AC voltage: 199.9mv, 1.999v, 19.99v, 199.9v, 750v

Resistance: 199.0Ω 1.999kΩ, 19.99kΩ199.99kΩ1.999mΩ19.99mΩ

www.OBD2Store.com-- China OBD2 Tool, Automotive Diagnostic Tools, Car Key Programmer, OBD2 ECU chip tuning tool Center.

Contact information:

Website: www.obd2store.com

Email: chinaobd2store@gmail.com

Skype: sales-obd2store@outlook.com

Whatapp/Wechat: +86-13682550935